HP 37717C Configuration Manual

Download Configuration manual of HP 37717C Measuring Instruments, Test Equipment for Free or View it Online on All-Guides.com.

Brand: HP

Category: Measuring Instruments , Test Equipment

Type: Configuration manual for HP 37717C

Pages: 12

Download HP 37717C Configuration manual

HP 37717C Configuration manual - Page 1
1
HP 37717C Configuration manual - Page 2
2
HP 37717C Configuration manual - Page 3
3
HP 37717C Configuration manual - Page 4
4
HP 37717C Configuration manual - Page 5
5
HP 37717C Configuration manual - Page 6
6
HP 37717C Configuration manual - Page 7
7
HP 37717C Configuration manual - Page 8
8
HP 37717C Configuration manual - Page 9
9
HP 37717C Configuration manual - Page 10
10
HP 37717C Configuration manual - Page 11
11
HP 37717C Configuration manual - Page 12
12
7
ATM cell test
interfaces
Option UKN
1
Page 8
ATM cell generation and
analysis: 2, 34 and 140 Mb/s
(includes all capability of
option UKJ structured PDH).
Option UKZ
2
Page 8
Generation and measurement
of ATM payloads: 1.544 (DS1),
44.736 (DS3), 2.048 (E1) and
34.368 (E3) Mb/s.
1
ITU-T
2
ANSI/ITU-T
ATM services
layer test
Option 0YK Page 9
Adds Channel View, graphical
display of CDV, AAL analysis,
rate history, benchmark traffic
generation. Must also order
option UKN or UKZ,
Option USL Page 9
Adds Ethernet LAN
connectivity testing plus all
features of option 0YK. Must
also order option UKN or UKZ.
STM-1e test
and interfaces
Option A1T Page 8
STM-1e (155 Mb/s) electrical
interface. Overhead access,
thru mode and pointer
sequences. TU-12, TU-2, VC-3
and VC-4 mappings.
(Provides STM-1o output
when option UKN and optical
interface option are selected.
STM-1o and OC-3c are
provided when option UKZ
and an optical interface
option are selected).
Optical
interfaces
Option UH1 Page 10
155 Mb/s (1310 nm).
Option USN Page 10
622/155 Mb/s (1310 and
1550 nm), optical power
measurement.
Option UKT Page 10
622/155 Mb/s (1310 nm),
optical power measurement.
Jitter, wander and slips
testing – generation*
Option A3K Page 9
PDH, 155 Mb/s, 622 Mb/s
jitter and wander generation.
Option 140 Page 9
As option A3K but without
wander generation.
Jitter, wander and slips
testing – measurement*
Option UHN Page 9
PDH jitter measurement.
Option A3L Page 9
155 Mb/s electrical and PDH
jitter measurement.
Option A3V Page 9
155 Mb/s optical, electrical
and PDH jitter measurement.
Option A3N Page 9
622 Mb/s, 155 Mb/s optical,
electrical and PDH jitter.
Broadband ATM services supported configurations
Where specified two modules may be ordered from certain categories (ie. UH3, UHC, 0YH).
* NB Jitter generation and measurement does not include DS1, DS3 and 52 Mb/s. PDH jitter depends on options fitted.
If option UKK/UKJ/UKN fitted then PDH jitter generation and measurement is provided at E1/E2/E3/E4.
If option 110 fitted then PDH jitter generation and measurement capability is provided at E1 and E3. 622 Mb/s
and 155 Mb/s jitter presented in ITU-T terminology as is specified in the HP 37717B/C communications performance
analyzer technical specifications (publication number 5966-0892E).
For compliance to Bellcore standards, please contact you local Hewlett-Packard representative for details.
Please contact your local sales
office if you require module
interworking capability not
specified here.
All modules work with UKX
(printer), A3B/A3D (remote
control) and USS (distributed
network analyzer software).