HP E1366A User's Manual
Download Operation & user’s manual of HP E1366A Multiplexer for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
OUTPut
The OUTPut subsystem enables or disables the “Trig Out” port of the
HP E1300A/E1301A mainframe or the HP E1405A/E1406A module.
Subsystem Syntax OUTPut
[:STATe] ON | OFF | 1 | 0
[:STATe]?
[:STATe] OUTPut[:STATe] ON | OFF | 1 | 0 enables/disables the “Trig Out” port on
the rear panel of the HP E1300A/E1301A mainframe or the
HP E1405A/E1406A module.
OUTPut[:STATe] ON | 1 enables the port
and
OUTPut[:STATe] OFF | 0 disables the port.
Parameters
Parameter Name Parameter Type Range of Values
ON | OFF | 1 | 0 boolean ON | OFF | 1 | 0
Comments • Enabling “Trig Out” Port: When enabled, a pulse is output from
the “Trig Out” port after each scanned switchbox channel is closed.
If disabled, a pulse is not output from the port after channel closures.
The output pulse is a +5 V negative-going pulse.
• “Trig Out” Port Shared by Switchboxes: When enabled, the
“Trig Out” port is pulsed by any switchbox each time a scanned
channel is closed. To disable the output for a specific switchbox,
send the
OUTPut[:STATe] OFF or OUTPut[:STATe] 0 command for
that switchbox.
• Related Commands: [ROUTE:]SCAN, TRIGger:SOURce
• *RST Condition: OUTPut[:STATe] OFF (port disabled)
Example Enable "Trig Out" Port
OUTP:STAT ON ! Enable “Trig Out” port to output
pulse after each scanned channel is
closed
[:STATe]? OUTPut[:STATe]? queries the present state of the “Trig Out” port. The
command returns 1 if the port is enabled or 0 if the port is disabled.
Example Query “Trig Out” Port Enable State
This example enables the “Trig Out” Port and queries the enable state. The
OUTPut[:STATe]? command returns 1 since the port is enabled.
OUTP:STAT ON ! Enable “Trig Out” port
OUTP:STAT? ! Query port enable state
Chapter 5 HP E1366A/E1367A RF Multiplexers Command Reference 47