HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM User Manual
Download Operation & user’s manual of HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Enclosure, Racks & Stands for Free or View it Online on All-Guides.com.
Brand: HP
Category: Enclosure , Racks & Stands , Software , Storage , Switch
Type: Operation & user’s manual for HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM
Pages: 204
Download HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Operation & user’s manual
To connect the storage system to a network using the direct attach method
1. Log on to the HP All-in-One Storage System with the default user name administrator and
the password hpinvent.
The HP All-in-One Storage System Management Console and Rapid Startup Wizard start
automatically.
NOTE:
You can change the administrator name and password when you configure the server using
the Rapid Startup Wizard. See “Running the Rapid Startup Wizard” on page 32.
2. To complete network configuration using the Rapid Startup Wizard, see
“Configuring the server on the network” on page 30.
Using the remote browser method
The storage system ships with DHCP enabled on the network port. If the server is placed on a
DHCP-enabled network and the serial number of the device is known, the server can be accessed
through a client running Internet Explorer 5.5 (or later) on that network using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same local network as the storage
system
• DHCP-enabled network
• Serial number or IP address of the storage system
To connect the server to a network using the remote browser method, you must first ensure that the
client is configured to download signed ActiveX controls.
To enable ActiveX controls
Installing and configuring the server24