HP 250C Service Manual
Download Service manual of HP 250C Plotter, Printer for Free or View it Online on All-Guides.com.
8Ć61 TroubleshootingC4699Ć90000
The colors on the plot are misaligned. (See also ' User's Guide, chapter 4.)
Refer to the printĆquality plot ' page 8Ć56:
4. - Pen-to-Pen Alignment Secondary: The first of these patterns tests alignment between the
cyan and magenta cartridges; it should be blue with no cyan or magenta shadows. The
second tests alignment between the cyan and yellow cartridges; it should be green with no
cyan or yellow shadows. The third tests alignment between the magenta and yellow
cartridges; it should be red, with no magenta or yellow shadows.
5. - Pen-to-Pen Alignment Primary: These patterns also test alignment between the different
cartridges. The inner color in each disk should not overlap the outer color.
The cartridges are misaligned with respect to each other.
Perform a print cartridge alignment.
Blurred lines. (See also ' User's Guide, chapter 4.)
D Different color inks, printed side by side, run into each other.
D Ink absorbs into the paper, spreading beyond the desired ink dot.
D Ink spreads along a fiber or fibers in the paper, creating a spider web" effect.
Plotting in fast mode.
D The ink is incompatible with the media type.
D Environmental conditions may affect the media. (Temperature or humidity levels are too
high.)
One or more of the following actions may be appropriate to solve the problem:
D Change the plotĆquality mode: Plotting in
Best mode slows plotting but improves quality.
D Use better quality media.
D If you are plotting on vellum or translucent media, try using HewlettĆPackard media.
D Recommended environmental conditions for optimum plot quality are in the range of
15 - 35 degrees Celsius (59 - 95 degrees Fahrenheit) with 20 - 80 % relative humidity.
D Pen problem: TTOE (Thermal TurnĆOn Energy) has not been performed because of
incorrect cartridge change. With the power ON, open the top cover and reseat the cartridge.