HP E1340A User's Manual
Download Operation & user’s manual of HP E1340A Portable Generator for Free or View it Online on All-Guides.com.
Generating Sine, Triangle, and Square Waves
This program outputs a Sine Wave at 1 kHz and 5 V output level. The
commands are:
1. Reset the AFG -
*RST
The *RST command aborts any waveform output and selects the
sinusoid function.
2. Set the Waveform Frequency -
[SOURce:]FREQuency[:FIXed] <frequency>
This command specifies the waveform frequency. Refer to Appendix
B for the frequency limits.
3. Select the Function -
[SOURce:]FUNCtion[:SHAPe] SINusoid
This command selects the SINusoid function. (Although *RST
automatically selects this function, it is selected here for good
programming practice.) For the Triangle and Square Wave functions,
use the
TRIangle and SQUare parameters, respectively, instead of
SINusoid.
4. Set the Amplitude -
[SOURce:]VOLTage[:LEVel][:IMMediate][:AMPLitude] <amplitude>
This command specifies the amplitude. Refer to the section called
“Selecting the Amplitude Levels and Output Units” on page 50 for
more information.
5. Initiate the Waveform -
INITiate[:IMMediate]
This command generates an immediate output with the arm source
set to
IMMediate. Refer to Chapter 5 for triggering information.
45 Generating Standard Waveforms with the HP E1340A Chapter 2