HP vp6110 Supplementary Manual

Download Supplementary manual of HP VP6100 Projector for Free or View it Online on All-Guides.com. This version of HP VP6100 Manual compatible with such list of devices, as: VP6100, VP6110, Vp6111, VP6120, vp6121

Brand: HP

Category: Projector

Type: Supplementary manual

Model: HP VP6100 , HP VP6110 , HP Vp6111 , HP VP6120 , HP vp6121

Pages: 4

Download HP VP6100 Supplementary manual

HP VP6100 Supplementary manual - Page 1
1
HP VP6100 Supplementary manual - Page 2
2
HP VP6100 Supplementary manual - Page 3
3
HP VP6100 Supplementary manual - Page 4
4
hp
vp6100 series
digital projector
password
security
Password Security
This projector model includes an option for setting up password security.
1. Open the on-screen menu and go to Password > Password active. Press
> to turn the password on or off.
2. Go to Password > Change password and press >. Press the arrow
buttons to select the four password digits, then press menu.
When you turn on the projector and are prompted for the password, press the
arrow buttons to select the four password digits, then press menu.
If you forget your password, contact HP for assistance. Have your proof of
purchase available.
Adgangskode
Denne projektormodel har en funktion, hvor du kan angive en adgangskode.
1. Åbn skærmmenuen, og gå til Adgangskode > Adgangsk. er aktiv.
Tryk på > for at aktivere eller deaktivere adgangskoden.
2. Gå til Adgangskode > Skift adgangskode, og tryk på >. Brug
pileknapperne til at vælge de fire cifre, der skal udgøre adgangskoden, og
tryk på menu.
Når du tænder for projektoren og bliver bedt om adgangskoden, skal du bruge
pileknapper til at vælge den fircifrede adgangskode og trykke på menu.
Kontakt HP, hvis du glemmer adgangskoden. Hav venligst købsbeviset ved
hånden.
Kennwortsicherheit
Dieses Projektormodell umfasst eine Option zum Einstellen der Kennwortsicherheit.
1. Öffnen Sie das On-Screen-Menü, und wechseln Sie zu Passwort >
Passwort aktiv. Drücken Sie die Taste >, um das Kennwort zu aktivieren
bzw. zu deaktivieren.
2. Wechseln Sie zu Passwort > Passwort ändern, und drücken Sie die
Taste >. Wählen Sie mit Hilfe der Pfeiltasten die vier Ziffern für das Kennwort
aus. Drücken Sie dann die Taste menu.
Wenn Sie beim Einschalten des Projektors nach dem Kennwort gefragt werden,
wählen Sie mit Hilfe der Pfeiltasten die vier Ziffern für das Kennwort aus. Drücken
Sie dann die Taste menu.
Sollten Sie das Kennwort vergessen, bitten Sie HP um Unterstützung. Halten Sie
dazu Ihren Kaufbeleg bereit.