HP Scanjet 2200c User Manual
Download Setup of HP Scanjet 2200c Scanner for Free or View it Online on All-Guides.com.
1
hp scanjet 2200c scanner
2. Unlock the scanner
Unlock the scanner by removing the plastic key from the bottom of the scanner.
a. Turn the scanner so the bottom is up.
b. Turn the green key to the left 1/4 turn and remove it from the scanner.
Note: Store the key in a safe place to re-lock the scanner if it is transported.
3. Connect the scanner (AFTER installing the software)
Caution: Only use the power supply, cables, and accessories supplied with this
equipment or expressly approved by Hewlett-Packard Company.
a. Connect the USB cable to the USB port on the back of the scanner.
b. Connect the other end of the USB cable to one of the USB ports on your PC.
4. Connect the power supply
a. Connect the power supply to the scanner.
b. Plug the power cord into an electrical outlet. This turns on power to the scanner
(there is no on/off switch).
Congratulations! Your scanner is now installed.
Note: When your computer detects new hardware, you might see a message
indicating a file was not found. To resolve this message, click Browse in the dialog
box, locate the CD-ROM drive, and then click OK. Click OK again to close the
dialog box.
5. Before you scan
a. Open the scanner lid.
b. Place the item to be scanned face-down on the scanner glass. The item must be
centered on the glass, with the top of the graphic or text closest to the front of
the scanner.
Setup
Setting up your scanner
Your scanner comes with a CD-ROM, a USB cable, and a power supply.
6. Begin scanning
Choose one of the following:
• Press a button on the scanner:
Scan: Starts the HP scanning software and scans your item.
Copy: Scans and prints a copy of your item.
• Double-click the scanner icon on the Windows desktop to open the software and
scan manually.
• Click Start, point to Programs, HP PrecisionScan LTX, and then click HP
PrecisionScan LTX to open the software and scan manually.
Find help and support
• For help using your HP ScanJet scanner, open the HP PrecisionScan LTX software
and click Help.
• For installation help, support, and specifications either:
- click HP Online Support Supplement from the Help menu.
- open the folder for your language on the CD-ROM and double-click
hpscanjt.hlp.
Note: The Support Supplement also contains warranty, service, and regulatory
information.
• For technical support and drivers, go to www.hp.com/go/cposupport
• For scanning ideas, tips, and product demonstrations, visit the HP Web site at
www.scanjet.hp.com
1. Install the software (BEFORE installing the hardware)
a. Quit all open programs (except Windows).
b. Insert the CD-ROM. If the installation program does not start automatically, open
the Windows Start menu, click Run, and then type x:setup.exe (where x is the
letter of the CD-ROM drive).
c. Follow the directions onscreen.
1
2
3
4
5
6
helpful
1
3
4
5
6
2