Humminbird 530758-3_C Information
Download Information of Humminbird 530758-3_C Transducer for Free or View it Online on All-Guides.com.
1
2
Plastic Thru-Hull Transducer
5
530758-3_C
© 2008 Humminbird®, Eufaula AL, USA.
All rights reserved.
Returning Your Unit for Service
Before sending your unit in for repair, please contact the factory, either by
p
hone or by email, to obtain a Repair Authorization Number for your unit.
NOTE: Please do not return your Humminbird® to the store for service.
Please have your product model name and serial number available before
calling the factory. If you contact the factory by e-mail, please include your
product model name and serial number in the e-mail, and use Request for
Repair Authorization Number for your e-mail subject header. You should
include your Repair Authorization Number in all subsequent communications
about your unit.
For IN-WARRANTY service, complete the following steps:
• Obtain a Repair Authorization Number from the Humminbird® Customer
Resource Center.
• Tag product with your name, street address, phone number and your
assigned Repair Authorization Number.
• Include a brief written description of the problem.
• Include a copy of your receipt (to show proof and date of purchase).
• Return product freight prepaid to Humminbird®, using an insured carrier
with delivery confirmation.
For OUT-OF-WARRANTY service, complete the following steps:
• Obtain a Repair Authorization Number from the Humminbird® Customer
Resource Center.
• Include payment in the form of credit card number and expiration date,
money order or personal check. Please do not send cash.
• Tag product with your name, street address, phone number and your
assigned Repair Authorization Number.
• Include a brief written description of the problem.
• Return product freight prepaid to Humminbird®, using an insured carrier
with delivery confirmation.
Contact Humminbird®
Contact the Humminbird® Customer Resource Center
in any of the following ways:
By Telephone
(Monday - Friday 8:00 a.m. to 4:30 p.m. Central Standard Time):
1-800-633-1468
By e-mail
(typically we respond to your e-mail within three business days):
cservice@johnsonoutdoors.com
For direct shipping, our address is:
Humminbird
Service Department
678 Humminbird Lane
Eufaula, AL 36027 USA
WARNING! This device should not be used as a navigational aid to prevent
collision, grounding, boat damage, or personal injury. When the boat is moving,
water depth may change too quickly to allow time for you to react. Always operate
the boat at very slow speeds if you suspectshallow water or submerged objects.
WARN ING! Disassembly and repair of this electronic unit should only be
performed by authorized service personnel. Any modification of the serial number
or attempt to repair the original equipment or accessories by unauthorized
individuals will void the warranty.
WARNING! This product contains chemicals known to the State of California to
cause cancer and/or reproductive harm.
ENVIR ONM ENT AL COMPLIANCE STATE MEN T: It is the intention of
Humminbird® to be a responsible corporate citizen, operating in compliance with
known and applicable environmental regulations, and a good neighbor in the
communities where we make or sell our products.
WEEE DIRECTIVE: EU Directive 2002/96/EC “Waste of Electrical and Electronic
Eq uipment Directive (W EE E)” im pacts mo st distribut or s, sellers, and
manufacturers of consumer electronics in the European Union. The WEEE
Directive requires the producer of consumer electronics to take responsibility for
the management of waste from their products to achieve environmentally
responsible disposal during the product life cycle.
WEEE compliance may not be required in your location for electrical & electronic
equipment (EEE), nor may it be required for EEE designed and intended as fixed
or temporary installation in transportation vehicles such as automobiles, aircraft,
and boats. In some European Uni on member states, the se vehicles are
considered outside of the scope of the Directive, and EEE for those applications
can be considered excluded from the WEEE Directive requirement.
This symbol (WEEE wheelie bin) on product indicates the product must
not be disposed of with other household refuse. It must be disposed of
and collected for recycling and recovery of waste EEE. Humminbird® will
mark all EEE products in accordance with the WEEE Directive. It is our
goal to comply in the collection, treatment, recovery, and environmentally sound
disposal of those products; however, these requirement do vary within European
Union member states. For more information about where you should dispose of
your waste equipment for recycling and recovery and/or your European Union
member state requirements, please contact your dealer or distributor from which
your product was purchased.
Thank You
Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird® has built its reputation by
d
esigning and manufacturing top-quality, thoroughly reliable marine equipment. Genuine Humminbird® accessories
offer the opportunity to upgrade and expand the capabilities of your Humminbird® product.
Your Humminbird® is designed for trouble-free use in even the harshest marine environment. In the unlikely event that
your Humminbird® does require repairs, we offer an exclusive Service Policy - free of charge during the first year after
purchase, and available at a reasonable rate after the one-year period. For complete details, see the Warranty section
included in this manual.
Contact our Customer Resource Center at either 1-800-633-1468 or visit our web site at www.humminbird.com.
Installation Overview
Following are instructions for the installation of this accessory. Before you start installation, we encourage you to read
these instructions carefully in order to get the full benefit from your Humminbird® accessory.
If you find that any items are missing from your installation kit, call our Customer Resource Center at
1-800-633-1468 or visit our web site at www.humminbird.com.
NOTE: This type of transducer installation is not recommended for trailerable boats.
NOTE: This transducer requires drilling a hole in the hull of the boat; therefore, installation should be performed by a
qualified marine technician.
In addition to the hardware supplied with your transducer, you will need a drill, a small drill bit for a pilot hole, a
1 1/8" hole saw, a level, and marine-grade silicone sealant.
Installation
Perform the procedures in the following sections to install the transducer on your boat.
1. Testing the Transducer Prior to Installation
Prior to installation, test the transducer to make sure that no damage occurred during shipping.
1. After connecting the transducer to the control head, hold the transducer in the water over the side of the boat
to confirm proper operation. If the transducer is working properly, you should be able to see the bottom on the
control head display. The bottom image should be relatively strong and there should be detailed structure on the
display.
2. Locating the Transducer Mounting Position
Outside the boat, the best location for the transducer will be aft midship, as close to the centerline of the boat as
possible. The transducer should be mounted forward of the propellers on inboard boats, and separated adequately
from other transducers, strakes, rivet lines, or other protrusions. Make sure that there is nothing in front, behind or to
the side of the transducer that is closer than 12".
Inside the boat, there must be room to access the mounting location for installation and cable routing.
Deadrise: Another consideration is the angle of deadrise. The transducer, when mounted, should point straight down.
If the selected mounting location has a hull deadrise of 8 degrees or greater, the included leveling block should be
used to level the transducer housing and direct the sonar signal straight down. If you need to use the leveling block,
make sure that the inside surface of the hull is smooth enough to seat the leveling block securely.
NOTE: If you cannot find a location that will work for your application, find a different transducer by contacting our
Customer Resource Center at either 1-800-633-1468 or by visiting our web site at www.humminbird.com.
Thru-Hull Installation
Deadrise Angle
Areas of Possible Turbulence
Rivets Strakes
Transom Hull
Preferred Mounting Location
Plastic Thru-Hull Transducer
1
530758-3_C
© 2008 Humminbird®, Eufaula AL, USA.
All rights reserved.