Hunter 41923 Owner's Manual

Download Installating and operation manual of Hunter 23685 Fan for Free or View it Online on All-Guides.com.

Brand: Hunter

Category: Fan

Type: Installating and operation manual

Model: Hunter 23685 , Hunter 23688 , Hunter 41923

Pages: 14

Download Hunter 23685 Installating and operation manual

Hunter 23685 Installating and operation manual - Page 1
1
Hunter 23685 Installating and operation manual - Page 2
2
Hunter 23685 Installating and operation manual - Page 3
3
Hunter 23685 Installating and operation manual - Page 4
4
Hunter 23685 Installating and operation manual - Page 5
5
Hunter 23685 Installating and operation manual - Page 6
6
Hunter 23685 Installating and operation manual - Page 7
7
Hunter 23685 Installating and operation manual - Page 8
8
Hunter 23685 Installating and operation manual - Page 9
9
Hunter 23685 Installating and operation manual - Page 10
10
Hunter 23685 Installating and operation manual - Page 11
11
Hunter 23685 Installating and operation manual - Page 12
12
Hunter 23685 Installating and operation manual - Page 13
13
Hunter 23685 Installating and operation manual - Page 14
14
8
Hunter Fan Company 41923-01 • 11/21/05
9
41923-01 • 11/21/05 Hunter Fan Company
5 Wiring the Fan
All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualied electrician.
5-1. Make sure the power is still o.
5-2. To connect the wires, hold the bare metal leads together and place
a wire nut over them, then twist clockwise until tight. For all these
connections use the wire nuts provided.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
5-3. Connect the ground wire from the ceiling to the green ground
wire from the ceiling plate and the green ground wire from the
downrod or low prole washer.
5-4. Using the large wire nuts, connect the white wire and the black
wire from the ceiling as follows:
e white (common) power wire from the ceiling to the white
wire from the receiver (marked on red tag “NEUTRAL IN”)
e black power wire from the ceiling to the black wire from
the receiver (marked on red tag “LIVE IN”)
5-5. Using the small wire nuts, connect the wires from the fan as
follows:
e black/white wire from the fan to the red wire from the
receiver (marked on white tag “LIGHT OUT”)
e black wire from the fan to the black wire from the receiver
(marked on white tag “FAN OUT”)
e white wire from the fan to the white wire from the receiver
(marked on white tag “COMMON OUT”)
5-6. Check each connection to make sure no bare wire or wire strands
are visible. Push all wires and wire nuts back through the ceiling
plate hole into the outlet box.
5-7. Run the white antenna wire from the receiver through one of the
slots in the ceiling plate so that it rests between the ceiling plate
and the ceiling. Push it to the edge of the ceiling plate for clear
reception.
Large Wire Nut
Small Wire Nut
Steps 5-3 – 5-7
Receiver