Home | About | Contact

Hunter 99127 User Manual

Download Operation & user’s manual of Hunter 99119 Fan, Remote Control for Free or View it Online on All-Guides.com.

Brand: Hunter

Category: Fan , Remote Control

Type: Operation & user’s manual

Model: Hunter 99119 , Hunter 99121 , Hunter 99127

Pages: 2

Download Hunter 99119 Operation & user’s manual

Hunter 99119 Operation & user’s manual - Page 1
1
Hunter 99119 Operation & user’s manual - Page 2
2
Page 1
background image

www.HunterFan.com

1.866.268.1936

Model 99127

Universal 3 Speed 

Ceiling Fan Remote

Installation

OR

OR

OR

Remove the canopy. If uncertain 
how to remove it, reference the fan’s 
owner’s manual. With wiring exposed, 
it may be helpful to note existing wire 
connections or take a digital photo for 
reference. Remove the wire connectors 
that connect the wires from the outlet 
box to the fan, leaving the grounding 
wires connected. 

Before installing the 
Universal Remote Control  
Receiver, use the pull chains 
to set the fan speed to HIGH 
and the light to ON. Be 
sure power is OFF before 
proceeding with installation.

Choose the hanging system that most closely resembles the one used by your fan and install the receiver as shown and wire as directed. 

Note: Some fans may have considerable excess lead wire. For easier canopy installation, cut the excess wire, leaving a minimum of 8” remaining. Re-strip the fan lead wires 1/2”. Place remaining excess 
wire into the ceiling electrical box. The bracket and fan must remain properly grounded.  

You may have installation issues if the fan is installed on an angled ceiling. For assistance, call 1-866-268-1936.

Ceiling

Plate

Receiver

Canopy

Receiver

Canopy

Ceiling

Bracket

Receiver

Fan Body

Cable Tie

For low profile fans, the receiver should 

be secured to the ceiling bracket with a 

cable tie.

Receiver

Canopy

M0077-01 • 01/14/14 • © Hunter Fan Company

Turn 

Pow

er

OFF

If you are installing multiple remote-controlled fans 

on the same circuit breaker

you may need to perform a few extra steps to prevent 

interference or faulty operation of your remote controls. 

 

Go to www.HunterFan.com/FAQs and click “How do I properly 

install multiple remote-controlled fans?” for more information. 

Wiring

CONNECT WIRES FROM RECEIVER TO FAN - Using the orange wire connectors, connect the blue wire from the 
receiver to the blue wire (or possibly black with white stripe wire) from the fan. Connect the yellow wire from the 
receiver to the black wire from the fan.  

If you’re uncertain about wire colors or connections, please contact a qualified electrician.

CONNECT WIRES FROM RECEIVER AND FAN TO WIRES FROM OUTLET BOX - Using the orange wire connectors, 
connect the black wire (ungrounded) from the ceiling to the black wire from the receiver. Connect the white wire 
(grounded) from the ceiling to both the white wire from the receiver and the white wire from the fan. 

AFTER ALL WIRES ARE CONNECTED and secured with wire connectors, re-install the canopy. 

Turn the splices upward and push them carefully back through the hanger bracket 

into the outlet box. Spread the wires apart, with the grounded wires on one side of 

the outlet box and the ungrounded wires on the other side of the outlet box.

To avoid possible electrical shock, before installing or servicing your fan, disconnect 

the power by turning off the circuit breakers to the outlet box and associated wall 
switch location. If you cannot lock the circuit breakers in the off position, securely 

fasten a prominent warning device, such as a tag, to the service panel.

 

FRO

M CEILING

FR

OM RECEIVER

black

blue

yellow

blue

FROM FAN

FR

OM R

ECEIVER

black

white

  white (grounded)

black (ungrounded)

white

FROM FAN