Hunter 32200 Instructions Manual

Download Instruction manual of Hunter 32200 Humidifier for Free or View it Online on All-Guides.com.

Brand: Hunter

Category: Humidifier

Type: Instruction manual for Hunter 32200

Pages: 24

Download Hunter 32200 Instruction manual

Hunter 32200 Instruction manual - Page 1
1
Hunter 32200 Instruction manual - Page 2
2
Hunter 32200 Instruction manual - Page 3
3
Hunter 32200 Instruction manual - Page 4
4
Hunter 32200 Instruction manual - Page 5
5
Hunter 32200 Instruction manual - Page 6
6
Hunter 32200 Instruction manual - Page 7
7
Hunter 32200 Instruction manual - Page 8
8
Hunter 32200 Instruction manual - Page 9
9
Hunter 32200 Instruction manual - Page 10
10
Hunter 32200 Instruction manual - Page 11
11
Hunter 32200 Instruction manual - Page 12
12
Hunter 32200 Instruction manual - Page 13
13
Hunter 32200 Instruction manual - Page 14
14
Hunter 32200 Instruction manual - Page 15
15
Hunter 32200 Instruction manual - Page 16
16
Hunter 32200 Instruction manual - Page 17
17
Hunter 32200 Instruction manual - Page 18
18
Hunter 32200 Instruction manual - Page 19
19
Hunter 32200 Instruction manual - Page 20
20
Hunter 32200 Instruction manual - Page 21
21
Hunter 32200 Instruction manual - Page 22
22
Hunter 32200 Instruction manual - Page 23
23
Hunter 32200 Instruction manual - Page 24
24
43001-01 04/27/2007 6 © 2007 Hunter Fan Co.
Cleaning The Humidier And The Water Tank
Relling The Water Tank
1. When the water tank level is low, turn the humidier ‘OFF’, and unplug.
2. Remove the tank and take it to the sink or tub to rell.
3. Turn the tank upside down and unscrew the tank cap by turning it counterclockwise. Empty the tank,
rell with fresh cool water (never use hot water), and replace the tank cap. Be sure not to overll the
tank as water damage may occur to furniture or ooring due to spillage. HUNTER WILL NOT ACCEPT
RESPONSIBILITY FOR DAMAGE TO PROPERTY CAUSED BY WATER SPILLAGE.
4. Carry the tank back to the humidier. Turn the tank upright and place it on the humidier. Be sure
that the tank is seated properly in the base. If the tank is properly located on the base, you will
see air bubbles owing up into the tank.
Many regions have hard water with high concentrations of minerals. When water evaporates from The
Hunter® Evaporative Humidier, minerals may be left behind. These minerals can form a hard white
scale which can be removed by following the cleaning instructions. The frequency of cleaning due
to mineral build up can vary depending upon the quality of water you may have.
Refer to Figure 1 for part names.
1. Turn the humidier ‘OFF’ and unplug the unit.
2. Lift the main housing and remove the water dispersion tray and the wick. The motor is attached
to the main housing. Do not place the motor near water. Do not use a wet towel on the motor or
motor housing as electrical shock may occur.
3. Replace the humidiers wick every 4 - 8 weeks or when it has turned brown.
4. Remove the water tank from the base and empty any water that is left in the tank. Soak the base
in a mixture of one (1) gallon of water and eight (8) ounces of vinegar for 20 minutes. The base is
dishwasher safe.
5. After soaking, wipe the base with a soft cloth or sponge to remove any mineral build up. Rinse
with clean water several times. If you are planning on storing the humidier, be sure the base
is completely dry.
6. Fill the water tank with one (1) gallon of water and eight ounces of undiluted white vinegar. Re-
place the tank cap and shake the tank vigorously until all interior surfaces of the tank have been
exposed to the water/vinegar mixture.
7. Empty the tank of the water/vinegar mixture. Rinse it several times with clean water and then
replace the tank cap. If you are planning on storing the humidier, dry it inside and out, leaving
the cap o to allow the tank to completely dry. Continue to clean the other parts of your humidi-
er.
8. Wipe the surfaces of the main housing with a soft cloth.
9. Once all the parts are clean, reassemble the humidier, and follow the USING YOUR
HUMIDIFIER to continue use. If you are storing the humidier, make sure the parts are completely
dry, reassemble, and store in a dry location.