Husqvarna 227R, 227RD, 232R, 232RD, 235R Operator's Manual

Download Operator's manual of Husqvarna 235FR Brush Cutter, Chainsaw for Free or View it Online on All-Guides.com. This version of Husqvarna 235FR Manual compatible with such list of devices, as: 235FR, 225R, 225RD, 225RJ, 232R, 232RD, 235R, 225R, 225RD, 227R, 227RD, 232R, 227R, 227RD, 232R, 232RD, 235R, 232RD

Husqvarna 235FR Operator's manual - Page 1
1
Husqvarna 235FR Operator's manual - Page 2
2
Husqvarna 235FR Operator's manual - Page 3
3
Husqvarna 235FR Operator's manual - Page 4
4
Husqvarna 235FR Operator's manual - Page 5
5
Husqvarna 235FR Operator's manual - Page 6
6
Husqvarna 235FR Operator's manual - Page 7
7
Husqvarna 235FR Operator's manual - Page 8
8
Husqvarna 235FR Operator's manual - Page 9
9
Husqvarna 235FR Operator's manual - Page 10
10
Husqvarna 235FR Operator's manual - Page 11
11
Husqvarna 235FR Operator's manual - Page 12
12
Husqvarna 235FR Operator's manual - Page 13
13
Husqvarna 235FR Operator's manual - Page 14
14
Husqvarna 235FR Operator's manual - Page 15
15
Husqvarna 235FR Operator's manual - Page 16
16
Husqvarna 235FR Operator's manual - Page 17
17
Husqvarna 235FR Operator's manual - Page 18
18
Husqvarna 235FR Operator's manual - Page 19
19
Husqvarna 235FR Operator's manual - Page 20
20
Husqvarna 235FR Operator's manual - Page 21
21
Husqvarna 235FR Operator's manual - Page 22
22
Husqvarna 235FR Operator's manual - Page 23
23
Husqvarna 235FR Operator's manual - Page 24
24
Husqvarna 235FR Operator's manual - Page 25
25
Husqvarna 235FR Operator's manual - Page 26
26
Husqvarna 235FR Operator's manual - Page 27
27
Husqvarna 235FR Operator's manual - Page 28
28
Husqvarna 235FR Operator's manual - Page 29
29
Husqvarna 235FR Operator's manual - Page 30
30
Husqvarna 235FR Operator's manual - Page 31
31
Husqvarna 235FR Operator's manual - Page 32
32
Husqvarna 235FR Operator's manual - Page 33
33
Husqvarna 235FR Operator's manual - Page 34
34
Husqvarna 235FR Operator's manual - Page 35
35
Husqvarna 235FR Operator's manual - Page 36
36
Husqvarna 235FR Operator's manual - Page 37
37
Husqvarna 235FR Operator's manual - Page 38
38
Husqvarna 235FR Operator's manual - Page 39
39
Husqvarna 235FR Operator's manual - Page 40
40
Husqvarna 235FR Operator's manual - Page 41
41
Husqvarna 235FR Operator's manual - Page 42
42
Husqvarna 235FR Operator's manual - Page 43
43
Husqvarna 235FR Operator's manual - Page 44
44
English 21
ASSEMBLY
Adjusting the harness and clearing
saw
Assembling and dismantling the
two-part shaft (227RD, 232RD)
Quick release
On the front is an easily
accessible, quick release
catch. Use this if the engine
should catch fire or in any
other emergency situation
when you quickly need to
take off the harness and
machine.
Even load on the
shoulders
A well-adjusted harness and
clearing saw significantly
facilitates working. Adjust
the harness for the best
working position. Tension
the side straps so that the
weight is evenly distributed
across the shoulders.
Correct height
1) Forestry clearing
Adjust the carrier strap so
that the suspension hook
comes approximately 10
cm under the hip. The
blade should be angled
forward a little.
2)Grass clearing
The suspension hook
should hang
approximately 20 cm
under the hip so that the
blade is parallel to the
ground.
Correct balance
1)Forestry clearing
Move the suspension eye
forwards or backwards. If
the blade is balanced a 10-
20 cm above the ground it
is easier to avoid stones.
2)Grass clearing
Let the blade balance at a
comfortable clearing
height, i.e. close to the
ground.
!
WARNING!
When working with the clearing saw it
should always be hooked in the harness.
If this is not done, you cannot control the
clearing saw safely and this can result in
injury to yourself or someone else. Never
use a harness with a defective quick
release catch.
Assembling:
Make sure the handle is
loose.
Guide the cut-out on the
lower section of the shaft
into the couplings
locking plate on the
upper section of the
shaft. The sections are
then locked together.
Tighten the handle.
Dismantling
Undo the handle (at least
three turns).
Press the handle towards
the coupling.
Carefully twist the lower
section out of the lock.
Hold both parts of the
shaft and pull out the
lower section from the
coupling.