Husqvarna 227R, 227RD, 232R, 232RD, 235R Operator's Manual

Download Operator's manual of Husqvarna 235FR Brush Cutter, Chainsaw for Free or View it Online on All-Guides.com. This version of Husqvarna 235FR Manual compatible with such list of devices, as: 235R, 225R, 225RD, 225RJ, 232R, 232RD, 235R, 225RD, 227R, 227RD, 232R, 232RD, 235R, 227RD

Husqvarna 235FR Operator's manual - Page 1
1
Husqvarna 235FR Operator's manual - Page 2
2
Husqvarna 235FR Operator's manual - Page 3
3
Husqvarna 235FR Operator's manual - Page 4
4
Husqvarna 235FR Operator's manual - Page 5
5
Husqvarna 235FR Operator's manual - Page 6
6
Husqvarna 235FR Operator's manual - Page 7
7
Husqvarna 235FR Operator's manual - Page 8
8
Husqvarna 235FR Operator's manual - Page 9
9
Husqvarna 235FR Operator's manual - Page 10
10
Husqvarna 235FR Operator's manual - Page 11
11
Husqvarna 235FR Operator's manual - Page 12
12
Husqvarna 235FR Operator's manual - Page 13
13
Husqvarna 235FR Operator's manual - Page 14
14
Husqvarna 235FR Operator's manual - Page 15
15
Husqvarna 235FR Operator's manual - Page 16
16
Husqvarna 235FR Operator's manual - Page 17
17
Husqvarna 235FR Operator's manual - Page 18
18
Husqvarna 235FR Operator's manual - Page 19
19
Husqvarna 235FR Operator's manual - Page 20
20
Husqvarna 235FR Operator's manual - Page 21
21
Husqvarna 235FR Operator's manual - Page 22
22
Husqvarna 235FR Operator's manual - Page 23
23
Husqvarna 235FR Operator's manual - Page 24
24
Husqvarna 235FR Operator's manual - Page 25
25
Husqvarna 235FR Operator's manual - Page 26
26
Husqvarna 235FR Operator's manual - Page 27
27
Husqvarna 235FR Operator's manual - Page 28
28
Husqvarna 235FR Operator's manual - Page 29
29
Husqvarna 235FR Operator's manual - Page 30
30
Husqvarna 235FR Operator's manual - Page 31
31
Husqvarna 235FR Operator's manual - Page 32
32
Husqvarna 235FR Operator's manual - Page 33
33
Husqvarna 235FR Operator's manual - Page 34
34
Husqvarna 235FR Operator's manual - Page 35
35
Husqvarna 235FR Operator's manual - Page 36
36
Husqvarna 235FR Operator's manual - Page 37
37
Husqvarna 235FR Operator's manual - Page 38
38
Husqvarna 235FR Operator's manual - Page 39
39
Husqvarna 235FR Operator's manual - Page 40
40
Husqvarna 235FR Operator's manual - Page 41
41
Husqvarna 235FR Operator's manual - Page 42
42
Husqvarna 235FR Operator's manual - Page 43
43
Husqvarna 235FR Operator's manual - Page 44
44
28 English
MAINTENANCE
Maintenance schedule
Below follows some general maintenance instructions.
If you need further information please contact your service
workshop.
Daily maintenance
1.Clean the outside of the
machine.
2.Make sure the harness is
not damaged.
3.Make sure the throttle
trigger lock and the
throttle function correctly
from a safety point of
view.
4.Check that the stop
switch functions.
5.Check that the cutting
head does not rotate while
idling.
6.Clean the air filter.
Replace if necessary.
7.Check that the guard is
undamaged and not
cracked.
Replace the guard if it
has been exposed to
impact or is cracked.
8.Check that the blade is
well centred, is sharp, and
is not cracked. An
uncentred blade causes
vibrations that can result
in damage to the
machine.
9.Check that the trimmer
head is undamaged and
not cracked. Replace the
trimmer head if necessary.
10.Check that the locking
nut is tight.
11.Check that the blades
transport guard is intact
and that it can be secured
correctly.
12.Check that all nuts and
screws are tightened.
1
2
4
3
6
7
8
11
9
5
10
12
Sharpening the clearing blade
!
WARNING!
Incorrect cutting equipment or an
incorrectly sharpened blade increases
the risk of kickback.
See the cutting
equipments packaging
for correct filing
instructions.
A correctly sharpened
blade is a prerequisite for
working efficiently and to
avoid unnecessary wear to
the blade and clearing
saw.
Make sure that the blade
is well supported when
you use the file. Use a 5.5
mm round file with a file
holder.
The sharpening angle is
15°. Every other tooth is
sharpened to the right
and the intermediate
tooth to the left. When
the blade has been heavily
pitted by stones the upper
side of the teeth can, in
exceptional cases, need to
be dressed using a flat file.
In such cases this takes
place before sharpening
with the round file.
Dressing the top side
must be carried out
equally for all teeth.
Adjust the setting. This
should be 1 mm.