Husqvarna 250 R Operators Manual
Download Operator's manual of Husqvarna 240 L Chainsaw, Engine for Free or View it Online on All-Guides.com. This version of Husqvarna 240 L Manual compatible with such list of devices, as: 240F, 240R, 250R, 252RX, 265RX
Brand: Husqvarna
Category: Chainsaw , Engine , Lawn and Garden Equipment , Saw , Sewing Machine , Trimmer
Type: Operator's manual
Model: Husqvarna 240 L , Husqvarna T 250 , Husqvarna 240F , Husqvarna 240R , Husqvarna 250R , Husqvarna 252RX , Husqvarna 265RX
Pages: 48
English – 19
ASSEMBLY
Fitting the trimmer guard and
trimmer head Trimmy SII
• Fit the correct trimmer guard (A) for use with the trimmer
head. Secure the trimmer guard using the 4 screws (L)
and the support plate (M) as shown.
• Fit the drive disc (B) on the output shaft.
• Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
• Insert the locking pin (C) in the hole to lock the shaft.
• Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
• Tighten the trimmer head to a torque of 35-50 Nm.
• To dismantle, follow the instructions in the reverse order.
Fitting other guards and cutting
attachments
Fit the trimmer guard/combination guard (A) intended for use
with the trimmer head/plastic blades. Secure the trimmer
guard using the 4 screws (L) and the support plate (M) as
shown.
• Fit the drive disc (B) on the output shaft.
• Turn the blade shaft until one of the holes in the drive disc
aligns with the corresponding hole in the gear housing.
• Insert the locking pin (C) in the hole to lock the shaft.
• Screw on the trimmer head/plastic blades (H) in the
opposite direction to the direction of rotation.
• To dismantle, follow the instructions in the reverse order.
B
A
L
M
C
H
B
A
L
M
C
H
H