Husqvarna 326RJX Operator's Manual

Download Operator's manual of Husqvarna 326RJX Brush Cutter, Trimmer for Free or View it Online on All-Guides.com.

Brand: Husqvarna

Category: Brush Cutter , Trimmer

Type: Operator's manual for Husqvarna 326RJX

Pages: 36

Download Husqvarna 326RJX Operator's manual

Husqvarna 326RJX Operator's manual - Page 1
1
Husqvarna 326RJX Operator's manual - Page 2
2
Husqvarna 326RJX Operator's manual - Page 3
3
Husqvarna 326RJX Operator's manual - Page 4
4
Husqvarna 326RJX Operator's manual - Page 5
5
Husqvarna 326RJX Operator's manual - Page 6
6
Husqvarna 326RJX Operator's manual - Page 7
7
Husqvarna 326RJX Operator's manual - Page 8
8
Husqvarna 326RJX Operator's manual - Page 9
9
Husqvarna 326RJX Operator's manual - Page 10
10
Husqvarna 326RJX Operator's manual - Page 11
11
Husqvarna 326RJX Operator's manual - Page 12
12
Husqvarna 326RJX Operator's manual - Page 13
13
Husqvarna 326RJX Operator's manual - Page 14
14
Husqvarna 326RJX Operator's manual - Page 15
15
Husqvarna 326RJX Operator's manual - Page 16
16
Husqvarna 326RJX Operator's manual - Page 17
17
Husqvarna 326RJX Operator's manual - Page 18
18
Husqvarna 326RJX Operator's manual - Page 19
19
Husqvarna 326RJX Operator's manual - Page 20
20
Husqvarna 326RJX Operator's manual - Page 21
21
Husqvarna 326RJX Operator's manual - Page 22
22
Husqvarna 326RJX Operator's manual - Page 23
23
Husqvarna 326RJX Operator's manual - Page 24
24
Husqvarna 326RJX Operator's manual - Page 25
25
Husqvarna 326RJX Operator's manual - Page 26
26
Husqvarna 326RJX Operator's manual - Page 27
27
Husqvarna 326RJX Operator's manual - Page 28
28
Husqvarna 326RJX Operator's manual - Page 29
29
Husqvarna 326RJX Operator's manual - Page 30
30
Husqvarna 326RJX Operator's manual - Page 31
31
Husqvarna 326RJX Operator's manual - Page 32
32
Husqvarna 326RJX Operator's manual - Page 33
33
Husqvarna 326RJX Operator's manual - Page 34
34
Husqvarna 326RJX Operator's manual - Page 35
35
Husqvarna 326RJX Operator's manual - Page 36
36
24 – English
MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section.
The user must only carry out the maintenance and service work described in this manual. More extensive work must be carried
out by an authorised service workshop.
Maintenance
Daily
maintenance
Weekly
maintenance
Monthly
maintenance
Clean the outside of the machine. X
Make sure the throttle trigger lock and the throttle function correctly from a
safety point of view.
X
Check that the stop switch works correctly. X
Check that the cutting attachment does not rotate at idle. X
Clean the air lter. Replace if necessary. X
Check that the guard is undamaged and not cracked. Replace the guard if
it has been exposed to impact or is cracked.
X
Check that the trimmer head is undamaged and not cracked. Replace the
trimmer head if necessary.
X
Check that the locking nut of the cutting equipment is tighten correctly. X
Check that nuts and screws are tight. X
Check that there are no fuel leaks from the engine, tank or fuel lines. X
Check the starter and starter cord. X
Check that the vibration damping elements are not damaged. X
Clean the outside of the spark plug. Remove it and check the electrode
gap. Adjust the gap to 0.5 mm (.20”), or replace the spark plug. Check that
the spark plug is tted with a suppressor.
X
Clean the machines cooling system. X
Clean or replace the spark arrestor mesh on the mufer (only applies to
mufers without a catalytic converter).
X
Clean the outside of the carburettor and the space around it. X
Check that the bevel gear is lled three-quarters full with lubricant. Fill if
necessary using special grease.
X
Check the fuel lter from contamination and the fuel hose from cracks or
other defects. Replace if necessary.
X
Check all cables and connections. X
Check the clutch, clutch springs and the clutch drum for wear. Replace if
necessary by an autorized service workshop.
X
Replace the spark plug. Check that the spark plug is tted with a
suppressor.
X
Check and clean the spark arrestor mesh on the mufer (only applies to
mufers tted with a catalytic converter).
X
Check and if necessary, clean the exhaust port of cylinder from carbon
deposits.
X