• Home
• Brands
• Husqvarna Manuals
• Husqvarna 323R series
• Husqvarna 323R Operator's Manual

Husqvarna 323R Operator's Manual

Download Operator's manual of Husqvarna 323R series Brush Cutter, Trimmer for Free or View it Online on All-Guides.com. This version of Husqvarna 323R series Manual compatible with such list of devices, as: 323R series, 325R, 325RDX, 325RX, 326R X-SERIES

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

10 – English

GENERAL SAFETY PRECAUTIONS

1151416-95 Rev. 1 2008-12-23

Cutting equipment

This section describes how to choose and maintain your

cutting equipment in order to:

• Reduce the risk of blade thrust.

• Obtain maximum cutting performance.

• Extend the life of cutting equipment.

Cutting equipment

Saw blades are intended for cutting fibrous types of wood.

Grass blades and grass cutters are intended for cutting

coarse grass.

A trimmer head is intended for trimming grass.

General rules

Only use cutting attachments with the guards we

recommend! See the chapter on Technical data.

Keep the teeth of the blade correctly sharpened! Follow our

instructions and use the recommended file gauge. An

incorrectly sharpened or damaged blade increases the risk of

accidents.

Keep the correct setting on the saw blade! Follow our

instructions and use the recommended setting tool. An

incorrectly set saw blade increases the risk of jamming and

blade thrust, and damage to the saw blade.

Check the cutting attachment for damage or cracks. A

damaged cutting attachment should always be replaced.

Sharpening grass cutters and grass

blades

• See the cutting attachment packaging for correct

sharpening instructions. Sharpen blades and cutters

using a single-cut flat file.

IMPORTANT!

Only use cutting attachments with the guards we

recommend! See the chapter on Technical data.

Refer to the instructions for the cutting attachment to check

the correct way to load the cord and the correct cord

diameter.

Keep the teeth of the blade correctly sharpened! Follow our

recommendations. Also refer to the instructions on the

blade packaging.

Maintain the correct blade setting! Follow our instructions

and use the recommended file gauge.

!

WARNING! Always stop the engine before

doing any work on the cutting attachment.

This continues to rotate even after the

throttle has been released. Ensure that the

cutting attachment has stopped completely

and disconnect the HT lead from the spark

plug before you start to work on it.

!

WARNING! Using an incorrect cutting

attachment or an incorrectly sharpened

blade increases the risk of blade thrust.