Husqvarna 23 LC Workshop Manual
Download Workshop manual of Husqvarna 23 COMPACT Chainsaw, Trimmer for Free or View it Online on All-Guides.com. This version of Husqvarna 23 COMPACT Manual compatible with such list of devices, as: 23 COMPACT, 23 LC, 26 L, 26 LC, 32 LC
Brand: Husqvarna
Type: Workshop manual
Model: Husqvarna 23 COMPACT , Husqvarna 23 LC , Husqvarna 26 L , Husqvarna 26 LC , Husqvarna 32 L , Husqvarna 32 LC
Pages: 38
ELECTRICALSYSTEM!
CHECKING FOR SPARK
1. Remove the spark plug using spark plug
replacement procedure 1thru 3 and clean off all
carbon, dirt and other deposits. Check the gap
between the electrodes. The air gap should be
0.25in (.635mm).
2. Ground sparkplug to cylinder and turn stop switch
on, give the starter rope one hard pull. A spark
should occur between the electrodes.
3. If no spark occurs, test with a new spark plug
or test plug.
4. Ifstil
switc
onlof
5.
6.
no spark occurs, disconnect leads for on/off
i.Pull starter rope again. If aspark occurs, the
switch is faulty and should be replaced.
—
If there is still no spark, check the ignition connec-
L/2
tion leads and contacts for poor connections, dirt,
1
breakage or damaged installation. Check ignition
Y
module air gap, itshould be setfrom.012 to.015 in.
4
-.
If there is stillno spark, replace the ignition modual.
17
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com