Icp N9MP2 Installation Insrtuctions

Download Installation insrtuctions of ICP 9MPD Furnace for Free or View it Online on All-Guides.com. This version of ICP 9MPD Manual compatible with such list of devices, as: 9MPD, 9MPT, 9MPV, N9MP2

Brand: ICP

Category: Furnace

Type: Installation insrtuctions

Model: ICP 9MPD , ICP 9MPT , ICP 9MPV , ICP N9MP2

Pages: 10

Download ICP 9MPD Installation insrtuctions

ICP 9MPD Installation insrtuctions - Page 1
1
ICP 9MPD Installation insrtuctions - Page 2
2
ICP 9MPD Installation insrtuctions - Page 3
3
ICP 9MPD Installation insrtuctions - Page 4
4
ICP 9MPD Installation insrtuctions - Page 5
5
ICP 9MPD Installation insrtuctions - Page 6
6
ICP 9MPD Installation insrtuctions - Page 7
7
ICP 9MPD Installation insrtuctions - Page 8
8
ICP 9MPD Installation insrtuctions - Page 9
9
ICP 9MPD Installation insrtuctions - Page 10
10
INSTALLATION INSTRUCTIONS
For Vent Drain Kit NAHAOOIDK
used on N9MP1, N9MP2, *9MPD, *9MPT & *9MPV Multi Position Gas Furnaces.
Denotes Brand (T, H or C)
Please read these instructions completely before attempting installation.
Parts List for Plastic Bag
Description
Coupling, Discharge
Clamp, Hose
Gasket, Trap
SMS, #8 X 1/2" Conical
Clamp, 5/8" ID
Clamp, 3/4" ID
Parts List for Carton
Yellow or Black Cap (for #1014003) 1170893
USE THE PARTS IN THIS KIT. EQUIVALENT PARTS IN THE
FURNACE MAY BE DISCARDED.
Part# Qty.
1002522 1 Description Part# Qty.
1013830 2 Plastic, Bag 1013402 1
1013701 1 Tube, Rubber 3/16" ID 1009238 1
1012537 2 Drain Tee 1171915 1
1012975 2 Drain Tee Trap 1171916 1
1012976 2 Trap, Condensate 1171917 1
2 Timprene Drain Hose 1/2" ID 1014358 1
Timprene Drain Hose 518" ID 1014359 1
Instructions, Drain Kit 441 06 1043 O0 1
Drain, Vent 1014003 1
These instructions are a supplement to the Installation Instructions shipped with each furnace. Refer to these instructions
for details on vent pipe sizing, maximum vent lengths, assembling the vent system and starting up the furnace.
Upflow Top Vent (*9MPD, *9MPT & *9MPV)
Yellow or black Plastic
TOP Venting
aps(Z)
Dual Pressure
_ Switch Detail _ _
VentDrain _ // _ I
(optional) E
F _:_q Drain
/ Tee\
L_ _ Hose& Clamps_
& Clamps
_1 SiwnigtI& PrDeetaS_lre
Representive drawing, some views will vary,
Trap Connection "Clamp ears"
Pointed OUT
Preassemble &
insert into furnace
3/16" I,D.
Rubber tube
25-24-41
UpflowTopVent (See Figure 1)
Replace and discard the Vent Drain shipped with the furnace if it
is the black Fasco coupling. Replace with the gray Vent Drain
shipped with the kit.
Attach the 1/2" ID drain hose from the bottom of the drain tee to the
condensate trap and securely clamp.
Attach the 3/16" ID rubber tube from the top of the transition box to
the drain trap.
Attach a Yellow or black cap to bottom port of vent drain and secure
with clamp.
Attach the 5/8" ID hose from the bottom of the transition box to the
drain trap and securely clamp.
441 06 1043 O0 (2/2003)