Insignia NS-AC1200 Quick Setup Manual
Download Quick setup manual of Insignia NS-AC1200 Adapter for Free or View it Online on All-Guides.com.
Brand: Insignia
Category: Adapter
Type: Quick setup manual
Model: Insignia NS-AC1200 , Insignia NS-AC1200-C
Pages: 2
1
2
Check out these important
safety instructions to keep
yourself and your devices safe.
Warning: Identifying the correct voltage and polarity settings
and adjusting the product is the user’s responsibility.
• This adapter should only be used with a 120V power
outlet. Follow all necessary safety precautions.
• Not recommended for use by children.
• Failure to adjust the adapter settings to match your
connected device’s requirements can result in damage
to the device.
Compatibility
Your device is compatible with this adapter if:
• The correct tip is available
• Your device’s voltage is between 3 and 12V DC
• Your device’s input does not require more than
1300mA (1.3A) of current (or 2100mA (2.1A) for 5V
connection)
• Your device has a positive polarity
BE
CAREFUL!
Quick Setup Guide
1300mA AC Adapter Set with USB Port
|
NS-AC1200 / NS-AC1200-C
Before using your new product, please read
these instructions to prevent any damage.
Package contents
• Universal AC adapter
• 7 adapter tips
• Quick Setup Guide
Features
Power
indicator
Power
cord
USB port
Choosing a tip
Carefully test the tips by gently inserting them into the
DC jack of your device. Choose a tip that ts snugly, but
do not force it to t.
Note: If you have your old adapter, you can compare the
connector of the old adapter to the available tips.
Setting up your adapter
You can nd your device’s input, polarity, and voltage on
the device itself, on its old adapter, or in its manual.
Contact the manufacturer if you cannot nd this
information. Using incorrect settings could damage your
device.
1 Check the input of the device you are connecting to
your adapter. If connecting a device using one of the
included tips, do not use this adapter if your device
requires more than 1300mA (1.3A) of current. If you
are connecting a USB device, do not use this adapter
if your device requires more than 2100mA (2.1A) of
current.
2 Check the voltage of your device, then slide the
voltage selector on your adapter to the same
voltage. Do not use this adapter if your device’s
voltage is not between 3 and 12V DC.
OR
If you are using a USB connection, slide the voltage
selector to 5V.
3 If you are using a USB connection, see “Using your
adapter.”
OR
Check the polarity of the device you are connecting
to your adapter.
• If your device has a positive polarity, connect the
chosen tip to the adapter’s connector.
• If your device has negative polarity, do NOT use this
adapter to power your device.
Voltage
selector
Connector
Tips
POSITIVE POLARITY
OR