Acer AT1921 User's Manual

Download Operation & user’s manual of Acer AT1921 LCD TV for Free or View it Online on All-Guides.com.

Brand: Acer

Category: LCD TV

Type: Operation & user’s manual

Model: Acer AT1921 , Acer AT1922

Pages: 18 (3.36 Mb)

Download Acer AT1921 Operation & user’s manual

Acer AT1921 Operation & user’s manual - Page 1
1
Acer AT1921 Operation & user’s manual - Page 2
2
Acer AT1921 Operation & user’s manual - Page 3
3
Acer AT1921 Operation & user’s manual - Page 4
4
Acer AT1921 Operation & user’s manual - Page 5
5
Acer AT1921 Operation & user’s manual - Page 6
6
Acer AT1921 Operation & user’s manual - Page 7
7
Acer AT1921 Operation & user’s manual - Page 8
8
Acer AT1921 Operation & user’s manual - Page 9
9
Acer AT1921 Operation & user’s manual - Page 10
10
Acer AT1921 Operation & user’s manual - Page 11
11
Acer AT1921 Operation & user’s manual - Page 12
12
Acer AT1921 Operation & user’s manual - Page 13
13
Acer AT1921 Operation & user’s manual - Page 14
14
Acer AT1921 Operation & user’s manual - Page 15
15
Acer AT1921 Operation & user’s manual - Page 16
16
Acer AT1921 Operation & user’s manual - Page 17
17
Acer AT1921 Operation & user’s manual - Page 18
18
English
6
Connecting the power cord
1 Connect the AC cord into the AC input on the back of the
set.
2 Connect the plug to the wall outlet as shown.
Setting up the remote control
1 Open the cover on the back of the remote unit.
2 Insert two AAA batteries (supplied) to match the polarity
indicated inside the battery compartment.
Basic connections
Getting started watching your TV
You can also adjust these settings using the front
control panel. Please see "Front panel view" on
page 3 for details.
Enjoying analog TV
Connecting an antenna/cable
Connect the antenna cable to the appropriate antenna
terminal on the back of the TV set as shown below.
Analog
1
Power
a. Turn on the power switch beneath the screen.
b. Press the
power button, number keys or channel up / down
button on the remote control.
2
Setup Wizard
The first time you switch on the TV, the Setup Wizard will guide you
to complete the language selection and channel scanning.
Press the OK key to begin the setup process.
Step 1. Select the setup language you prefer.
Step 2. Please select country.
Step 3. Ensure that your co-axial cables are connected
correctly before proceeding.
Step 4. Scan for analog channels.
Step 5. Setup is now complete. You are ready to begin
watching TV.
If you leave the setup process before it is complete,
you will be given a choice of options:
1. Resume setup
2. Resume setup wizard at next startup
3. Exit and do not remind me
Select an option and press
OK to exit.
3
Changing channels
a. Press 0 - 9 on the remote control to select a channel. The
channel changes after 2 seconds. Press ENTER to select
the channel immediately.
b. Pressing the channel (
CH ) up / down button on the
remote control will also change the channel.
4
Adjusting the volume
Adjust the volume level using the ( VOL ) up/down button on
the remote control.
Setup may vary due to local broadcast differences.
1
2
4
1
1
3