InSinkErator Invite H770-SS Specifications
Download Specifications of InSinkErator Invite H770-SS Garbage Disposal for Free or View it Online on All-Guides.com.
Brand: InSinkErator
Category: Garbage Disposal
Type: Specifications for InSinkErator Invite H770-SS
Pages: 1
1
6-3/8
"
4-3/8"
11"
6-1/8"
6-3/4"
NOTE: Max counter thickness is 3/4".
2-1/2"
Minimum 2" required
from sink hole center
to backsplash
1/4" Incoming
Water Supply
Inlet Tube
Flexible
Outlet Tube
Flexible
Vent Tube
The Next
Necessity
™
Submittal Sheet
Job Specifications
HWD389-11F-45-02
• Hot Only – Dispenses near-boiling 200°F
• 35% more near-boiling water from larger
2/3-gallon stainless steel tank
• Easy to adjust temperature control
• Tool-free tank connections and dry start
protection to ease installation
• Provides 60 cups/hr of near-boiling water
• 3-Year In-Home
Service Warranty*
• 115 volts, 750 watts, 6.25 amps
• Available in chrome with black handle
Specifications
Capacity
Electrical
Thermostat
Insulation
Valve
Shipping Weight
Recommended
Supply Pressure
Required
Hole Diameter
2/3-gallon stainless
steel tank dispenses
60 cups of 200˚F
water per hour
Snap-action,
adjustable from
160˚F to 210˚F
(factory pre-set
at 200˚F)
Meets U.L. 94HF-1
flammabiltiy
specification
Instant, self-closing
30-125 psi
Approximately
7.4 lbs.
1-1/4" – 1-1/2"
standard sink hole
115 volts A.C., 750
watts, 6.25 amp
heating element
with grounded
three (3) prong plug
Printed in USA
1-800-558-5700
www.insinkerator.com
The Emerson logo is a trademark and
service mark of Emerson Electric Co.
InSinkErator may make improvements and/or
changes in the specifications at any time, in its sole
discretion, without notice or obligation and further
reserves the right ot change or discontinue models.
© 2011 InSinkErator, a division of
Emerson Electric Co. All Rights Reserved.
The original instant hot water
dispenser with easy-to-twist handle
Instant Hot Water Dispensers
H770-SS
Complies with Lead Plumbing Law
We Come To You
®
Dimensions
Sample Specification
Instant hot water dispenser(s) shall be
InSinkErator Model H770-SS with
2/3-gallon stainless steel tank, adjustable
temperature from 160°F to 210°F and
instant, self-closing hot valve.
Warranty:
3-year parts and in-home service.
* The complete InSinkErator warranty is included in the Care & Use
booklet packed with each unit.
US Pat. D532,497 (tank enclosure)