Intermatic EJ500C Supplementary Manual
Download Programming manual of Intermatic EJ500C Timer for Free or View it Online on All-Guides.com.
1
2
Easyset Programming the Intermatic EJ500C timer.
Special note: The EJ500 timer can not be used with compact fluorescent style bulbs.
R
esetting the timer:
P
ress the
R
ESET
a
nd the
N
EXT ON/OFF
b
uttons at the same time.
Release the buttons and wait for 1200 to start blinking.
Setting the calendar: Press the MODE button one time. ( CAL ) will appear in the top left corner.
Y
ear will be flashing between the word year and 2003.
If the year is not showing 2003 you must repeat the
RESET procedure.
To adjust the year press the
M+ZONE+YEAR+ button (bottom right)
If you pass the present year use the (bottom center) button to subtract a year.
Press the
NEXT ON/OFF button one time. DATE will be flashing.
Press the
DAY/DST (bottom left) button to set the current day.
Press the
M+ZONE+YEAR+ (bottom right) to set the current month.
Press the
NEXT ON/OFF button one time. DST/AUTO will be flashing.
Press the
DAY/DST button ( bottom left) to select daylight savings time.
If daylight savings is not being used press the button again and select manual.
Press the
NEXT ON/OFF button one time. ZONE will be flashing.
Press the
M+ZONE+YEAR+ button (bottom right) and select the zone area of your location.
South , Central or North.
Press the
NEXT ON/OFF button one time. SUNUP will be flashing showing the preset time for this zone.
To adjust this time press the
HOUR+YEAR- button (bottom center) to adjust the hour and the
M+ZONE+YEAR+ button (bottom right) to adjust the minutes.
Press the
NEXT ON/OFF button one time. SUNDN will be flashing, showing the preset time for this zone.
To adjust this time, press the
HOUR+YEAR- button (bottom center) to adjust the hour and the
M+ZONE+YEAR+ button (bottom right) to adjust the minutes.
The calendar portion of the timer is now set.
Note: you must continue and set both the clock and the programming function.
Setting the clock
: Press the MODE button one time. (CLK) will be displayed in the top left corner of the timer. Using the
HOUR+YEAR- button (bottom center) set the hour of your current time.
Using the
M+ZONE+YEAR+ (bottom right) button set the minutes of your current time.
Programming: Press the MODE button one time. (PGM) will be displayed on the top left corner of the timer. We are setting
the
ON time for Program 1. --:-- -- 1 ON will be displayed on the screen.
Press the
DA
Y/DST
(bottom left) button to select the day or series
of days the timer is to turn
ON.
Y
ou can
either select the
ASTRO time, which will adjust as the days get longer and shorter or a specific time. To use the
ASTRO time press the DAY/DST until SNST appears on the screen. All seven days will be shown on the bottom
of the timer.
Or to use a specific time press the
DAY/DST button and select the day or series of days the timer is to turn ON.
Use the HOUR+YEAR- (bottom center) button and select the HOUR to turn the unit ON. Use the
M+ZONE+YEAR+ (bottom right) button to set the MINUTES of your on time.
Press the next
ON/OFF button one time. We are now setting the OFF time for program 1. Press the DAY/DST
(bottom left) to select the day or series of days of operation.
T
o use the
ASTRO time press the button until
SNUP appears on your screen.
Or to select a specific time, press the
DAY/DST button and select a day or series of days the unit is to turn Off.
Press the
HOUR+YEAR- (bottom center) button and set the hour of your off time. Press the M+ZONE+YEAR+
(bottom right) button to select the minutes of your Off time.
For additional programs press the
NEXT ON/OFF button to the next program and follow above steps. Check the unused programs to
assure they are blank. To check the other programs press the
NEXT ON/OFF button, you should see --:-- -- on the screen. If a time
appears press and release the
DAY/DST button until the --:-- -- appears. Repeat this step thru Program 7 off.
Press the
MODE button. (AUT
O) will appear on top center of screen.
Note: If your timer is in the
ON position and your program calls for the unit to be OFF at this time press the NEXT ON/OFF button to
toggle the unit to
OFF.
For further assistance please call our technical support at 815-675-7000
I
I
N
N
T
T
E
E
R
R
M
M
A
A
T
T
I
I
C
C
I
I
N
N
C
C
O
O
R
R
P
P
O
O
R
R
A
A
T
T
E
E
D
D
SPRING GROVE, ILLINOIS 60081-9698
http://www
.intermatic.com
158EJ12685
158EJ12685.qxp 2/24/06 9:43 AM Page 1