Intermec Janus 2010 User Manual
Download Operation & user’s manual of Intermec Janus 2010 Barcode Reader, Handhelds for Free or View it Online on All-Guides.com.
Brand: Intermec
Category: Barcode Reader , Handhelds , PDA
Type: Operation & user’s manual for Intermec Janus 2010
Pages: 8
1
2
3
4
5
6
7
8
Code 39Code 39 nuggnuggnugg
1
Addendum for 4MB JANUS User Manuals
With release 4.05, several significant changes were made to the JANUS
software. These changes include:
• MSI, Plessey, Code 16K, and Code 11 symbologies were removed to make
room for the new ISBT Code symbology. The removed symbologies are still
available if you load an older version (Release 4.04 or earlier) of the
decoding and configuration system on your JANUS device.
To restore the removed symbologies, you must load DECSCAN.EXE,
CFGUMA.EXE, LOADUMA.EXE, RSERUMA.EXE, IC.EXE, and
IC001.DAT on Drive D of your JANUS device.
• The manual viewporting function now supports true manual viewporting.
Earlier versions of the JANUS software set viewport movement to
automatic when a DOS program was executed.
• The autobacklight function was modified and now allows you to turn on
the backlight when a key on the keyboard is pressed.
• You can now use the MakeDisk utility to extract individual files from a
JANUS image file.
This information supplements the information provided in your JANUS user’s
manual. Please keep this addendum with your user’s manual.
Code 128 Enhancements
Purpose: Enables, disables, or configures decoding of Code 128 symbology. Code 128 is a
very high density alphanumeric symbology that supports the extended ASCII
character set. It is a variable length, continuous code that uses multiple element
widths.
Default: Standard
Syntax: CH
data
Acceptable values for data are:
0 Disabled
1 Standard Code 128
2 UCC/EAN Code 128
8 ISBT Code 128