Jet DC-1200A Operating Instructions And Parts Manual

Download Operating instructions and parts manual of Jet DC-1200A Dust Collector for Free or View it Online on All-Guides.com.

Brand: Jet

Category: Dust Collector

Type: Operating instructions and parts manual

Model: Jet DC-1200A , Jet DC-1200C , Jet DC-1200RC

Pages: 20

Download Jet DC-1200A Operating instructions and parts manual

Jet DC-1200A Operating instructions and parts manual - Page 1
1
Jet DC-1200A Operating instructions and parts manual - Page 2
2
Jet DC-1200A Operating instructions and parts manual - Page 3
3
Jet DC-1200A Operating instructions and parts manual - Page 4
4
Jet DC-1200A Operating instructions and parts manual - Page 5
5
Jet DC-1200A Operating instructions and parts manual - Page 6
6
Jet DC-1200A Operating instructions and parts manual - Page 7
7
Jet DC-1200A Operating instructions and parts manual - Page 8
8
Jet DC-1200A Operating instructions and parts manual - Page 9
9
Jet DC-1200A Operating instructions and parts manual - Page 10
10
Jet DC-1200A Operating instructions and parts manual - Page 11
11
Jet DC-1200A Operating instructions and parts manual - Page 12
12
Jet DC-1200A Operating instructions and parts manual - Page 13
13
Jet DC-1200A Operating instructions and parts manual - Page 14
14
Jet DC-1200A Operating instructions and parts manual - Page 15
15
Jet DC-1200A Operating instructions and parts manual - Page 16
16
Jet DC-1200A Operating instructions and parts manual - Page 17
17
Jet DC-1200A Operating instructions and parts manual - Page 18
18
Jet DC-1200A Operating instructions and parts manual - Page 19
19
Jet DC-1200A Operating instructions and parts manual - Page 20
20
11
Filter Bag Installation – DC-1200A/RC
Referring to Figure 7:
1. Place the hanger (A) on the hanger bracket (B).
2. Slide the filter bag loop (C) over the hanger hook.
3. Thread the retainer strap (D) through the loops on
the filter bag (E) and fasten to the collector
housing (F).
Collector Bag Installation – DC-1200A/RC
Referring to Figure 8:
4. Insert the ring (A) of the collector bag into the
bottom of the housing (B) at an angle. Pull down
on the bag to make sure it “seats” in the housing.
5. Position the plastic window in front so that you can
easily see when the collector bag is full.
After completing the filter bag and collector bag
installation, proceed to Electrical Connections.
Figure 7
Figure 8