Jiffy 70 Series Operating Manual

Download Operating manual of Jiffy 70 Series Drill for Free or View it Online on All-Guides.com.

Brand: Jiffy

Category: Drill

Type: Operating manual for Jiffy 70 Series

Pages: 6

Download Jiffy 70 Series Operating manual

Jiffy 70 Series Operating manual - Page 1
1
Jiffy 70 Series Operating manual - Page 2
2
Jiffy 70 Series Operating manual - Page 3
3
Jiffy 70 Series Operating manual - Page 4
4
Jiffy 70 Series Operating manual - Page 5
5
Jiffy 70 Series Operating manual - Page 6
6
1
Jiffy 70 Series
Power Ice Drill
OPERATING MANUAL/PARTS GUIDE
This manual contains operating and safety instructions for the Jiffy
70 Series Power Ice Drill. To receive the greatest possible
performance and satisfaction from your Jiffy Power Ice Drill, and to
reduce the risk of injury, it is important that you read and understand
the assembly, operating, maintenance, and safety instructions before
using your Jiffy Power Ice Drill. Contact your Jiffy dealer or
Feldmann Engineering if you do not understand any of the
instructions in this manual.
As with any power tool, safety precautions must be observed with
the Jiffy Power Ice Drill to reduce the risk of personal injury.
Careless or improper use may cause serious injury and/or damage
to your Jiffy Power Ice Drill.
INDEX
Page
MANUFACTURER’S One Year Limited Warranty
Number
General Information …………………….. 1
Warranty………………………………….. 1
General Safety Precautions ……………. 2
Pre-Use Procedure ……………………... 2
Assembly of Drill………………………. 3
Oil & Fuel Recommendations…………… 3
To Mix Oil & Gasoline, Fuel Mix Chart…. 3
Fueling…………………………………….. 3
Check Before Starting Your Drill……….. 3
Starting Instructions……………………… 3
Operating/Stopping Instructions………… 4
Maintenance and Adjustments…………. 4
Service & Repair Information…………… 5
Diagram of Main Parts, Parts List……… 6
(30 days for Commercial and/or Rental Use)
Feldmann Engineering & Manufacturing Co., Inc. warrants the Jiffy
Power Ice Drill to be made of first quality materials and workmanship
and will, at its option, repair or replace any drill part thereof found to
be defective in such materials and workmanship if returned to the
factory, prepaid within one year from the date of purchase by the
original purchaser. Inbound and outbound transportation charges are
paid by the purchaser. Feldmann Engineering assumes no
responsibility for damage caused by misuse, careless handling, or
where repairs were made or attempted by an unauthorized person.
The engine and its operation are covered by the engine
manufacturer’s warranty. For engine service or parts, contact your
local Tecumseh service outlet, phone
1-800-558-5402, or
visit Tecumseh web
site www.tecumsehpower.com
SERVICE & REPAIR INFORMATION
For engine adjustments, repairs or warranty service not
covered in this manual, contact your nearest AUTHORIZED
TECUMSEH SERVICE OUTLET. They are listed in your
telephone book yellow pages under “Engines, Gasoline”. If
you cannot find an Authorized Tecumseh Service Outlet near
you, call
1-800-558-5402 to locate the Tecumseh outlets
nearest you, or visit the Tecumseh web site at
www.tecumsehpower.com.
For non-engine related adjustments, repairs or warranty
service contact your nearest Authorized Jiffy Service Center
listed in the Jiffy Service Directory or call (920) 467-6167 for
locations near you, or visit our web site at
When requesting
warranty service, Jiffy ice drill proof of purchase establishes
the date of sale and the start of the warranty period.
www.jiffyonice.com.
Manufactured by:
FELDMANN ENGINEERING &
MANUFACTURING CO., INC.
520 Forest Avenue
Sheboygan Falls WI 53085-2513
Phone: 920-467-6167
FAX: 920-467-6169
e-mail: admin@jiffyonice.com
www.jiffyonice.com
Other products include: TurfVent Lawn Aeration Equipment, BADGER Earth
Augers
Form #WM3071-06A (08/08)