• Home
• Brands
• Juniper Manuals
• Juniper 16-PORT GIGABIT ETHERNET XPIMS
• Juniper 16-PORT GIGABIT ETHERNET XPIMS Datasheet

Juniper 16-PORT GIGABIT ETHERNET XPIMS Datasheet

Download Datasheet of Juniper 16-PORT GIGABIT ETHERNET XPIMS Other for Free or View it Online on All-Guides.com.

1

2

3

4

DATASHEET

1

Product Description

Juniper Networks XPIMs are a set of interface modules supported on Juniper Networks

®

SRX650 Services Gateway. These modules implement the full set of Layer 3–7 services

offered in Juniper Networks Junos

®

operating system, and alternatively implement Layer 2

Ethernet switching for connecting local servers and PCs to the network.

Two XPIM models are available on the SRX650:

• 16-port 10/100/1000 copper Ethernet. This module is two slots high (double high) and

one slot wide. An optional 16-port 10/100/1000 PoE switch module is available with 16

PoE ports.

• 24-port 10/100/1000 copper Ethernet. This module is two slots high (double high) and

two slots wide (double wide). An optional 24-port 10/100/1000 PoE switch module is

available with 24 PoE ports. The 24-port module supports up to 4 small form-factor

pluggable transceivers (SFPs) from a variety of SFPs to implement 100 Mbps or 1 Gbps

Ethernet optionally reusing the last 4 copper ports.

Architecture and Key Components

The XPIMs are highly flexible interfaces that give the network designer the tools to solve a

wide variety of networking problems.

Network Segmentation

The XPIMs can be used to subnet or segment network traffic by configuring each Ethernet

port as a separate routed network or subnet. This localizes broadcast and multicast traffic

to a local segment and allows different security policies to be applied to each subnet.

Alternatively, XPIM ports can be assigned to VLANs in Layer 2 (L2) switching mode to

provide delineation and segmentation of the L2 broadcast domain.

Security Zones

Many organizations need to improve internal security and keep critical information private

within departments. At the same time, they need to provide guest access and protect

local resources. The XPIMs give the network designer the extra Ethernet ports necessary

to implement security zones for departmental access.

Local Workgroups

The network designer can use the Ethernet switching capability of the XPIMs to create

local workgroups. Integrating L2 switching into the SRX650 saves space and simplifies

management by using a single user interface to configure the switch and the SRX650

secure router.

Product Overview

Juniper Networks 16-port and 24-port

gigabit Ethernet Physical Interface

Modules (XPIMs) oer high densities of

10/100/1000 copper Ethernet ports and

are also available in Power over Ethernet

(PoE). These ports deliver the rich set of

Layer 2–7 services available via Juniper

Networks Junos operating system on

the SRX650 Services Gateway.

16-PORT AND

24-PORT GIGABIT

ETHERNET XPIMS