Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
• REB00–Slot in which the backup Routing Engine resides. 00 indicates that there
is no backup Routing Engine.
• PRDT640—Juniper Networks router product, which is the T640 router.
4. Configure the Routing Engine that is part of PSD12. This Routing Engine is located
in slot 3 of the JCS chassis and acts as standalone router (not a route reflector).
To configure the Routing Engine in slot 3, issue the following command:
system> baydata -b 03 -data “V01–JCS1–SD1–PSD12–REP03–REB00–PRDT640”
The baydata command specifies the target as a bay blade (-b), identifies the blade
(Routing Engine) in slot 03, and specifies the following parameters:
• V01—Product version, which is 01.
• JCS1—JCS platform identifier, which is 1.
• SD1—RSD identifier, which is 1. This router is in SD1, the route reflector is in SD2.
• PSD12—PSD identifier, which is 12.
• REP03—Slot in which the primary Routing Engine resides, which is 03.
• REB00–Slot in which the backup Routing Engine resides. 00 indicates that there
is no backup Routing Engine.
• PRDT640—Juniper Networks router product, which is the T640 router.
5. Configure the Routing Engine that is part of PSD13. This Routing Engine is located
in slot 4 of the JCS chassis and acts as standalone router (not a route reflector).
To configure the Routing Engine in slot 4, issue the following command:
system> baydata -b 04 -data “V01–JCS1–SD1–PSD13–REP04–REB00–PRDT640”
The baydata command specifies the target as a bay blade (-b), identifies the blade
(Routing Engine) in slot 04, and specifies the following parameters:
• V01—Product version, which is 01.
• JCS1—JCS platform identifier, which is 1.
• SD1—RSD identifier, which is 1. This router is in SD1, the route reflector is in SD2.
• PSD13—PSD identifier, which is 13.
• REP04—Slot in which the primary Routing Engine resides, which is 04.
• REB00–Slot in which the backup Routing Engine resides. 00 indicates that there
is no backup Routing Engine.
• PRDT640—Juniper Networks router product, which is the T640 router.
Results Display the results of the configuration:
Copyright © 2010, Juniper Networks, Inc.160
JUNOS 10.4 Protected System Domain Configuration Guide