Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
l2vpn {
encapsulation-type frame-relay;
site 2 {
site-identifier 2;
interface so-4/0/3.2 {
remote-site-id 1;
}
}
}
}
}
}
PSD2 Configuration
Step-by-Step
Procedure
The configuration for PSD2 is much the same as the configuration that was running on
the T640 router in the original VPN network topology before the consolidation of two
routers into a single platform.
The key difference is the management configuration. To configure the unique parameters
for PSD2:
1. Configure the following statements at the [edit system re0] hierarchy level:
a. Include the host-name customer-b statement to configure the hostname for the
master Routing Engine (re0) on PSD2.
b. Include the backup-router 192.168.71.254 statement to configure a backup router.
The backup router should be directly connected to the local routing platform by
way of the management interface.
c. Include the address 192.168.66.240/21 statement at the [edit interfaces fxp0 unit
0 family inet] hierarchy level to configure the fxp0 management interface.
2. Configure the backup Routing Engine parameters by including the following
statements at the [edit system re1] hierarchy level:
a. Include the host-name customer-b1 statement to configure the hostname for
the backup Routing Engine (re1) on PSD2.
b. Include the backup-router 192.168.71.254 statement to configure a backup router.
The backup router should be directly connected to the local routing platform by
way of the management interface.
c. Include the address 192.168.66.242/21 statement at the [edit interfaces fxp0 unit
0 family inet] hierarchy level to configure the fxp0 management interface.
Results Display the results of the configuration:
re0 {
system {
host-name customer-b;
backup-router 192.168.71.254 destination [ 172.16.0.0/12 192.168.0.0/16
207.17.136.192/32 10.9.0.0/16 10.10.0.0/16 10.13.10.0/23 10.84.0.0/16 10.5.0.0/16
185Copyright © 2010, Juniper Networks, Inc.
Chapter 14: Configuration Examples