Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
displaylog
Syntax displaylog -T system:mm[x] <-a> <-date date-filter> <-sev severity-filter> <-src
source-filter>
Release Information Command supported by Junos OS Release 9.1 and later.
Description (JCS management module CLI) Display the JCS management module event log entries.
Options -T system:mm[x]—Specify the management module as the target of the command.
Replace x with a value of 1 or 2.
-a—(Optional) Display all entries in the JCS management module event log. By default,
the displaylog command displays only the first five entries in the log.
-date date-filter—(Optional) Display all entries in the JCS management module event
log that meet the date filter criteria. Replace date-filter with a list of dates in mm/dd/yy
format. Use the pipe symbol (|) to separate dates in the list. For example, specify the a
-date 03/17/2008|03/18/2008 filter to show all events in the log that occurred on March
17, 2008 and March 18, 2008.
-sev severity-filter—(Optional) Display all entries in the JCS management module event
log that meet the severity filter criteria. Replace severity-filter with a list of severities. Use
the pipe symbol (|) to separate severities in the list. Severities you can specify include:
• I—information
• E—error
• W—warning
For example, you can specify a -sev E|W filter to show all error and warning events in the
log.
-src source-filter—(Optional) Display all entries in the JCS management module event
log that meet the source filter criteria. Replace source-filter with a list of event sources.
Use the pipe symbol (|) to separate sources in the list. Sources you can specify include:
• blade_x—Routing Engine (blade). Replace x with a value of 01 through 12.
• blower-x—JCS fan (blower). Replace x with a value of 1 through 4.
• mm_x—JCS management module. Replace x with a value of 1 or 2.
• mt_x—JCS media tray. Replace x with a value of 1 or 2.
• power_x—JCS power supply. Replace x with a value of 1 through 4.
• switch_x—JCS switch module. Replace x with a value of 1 or 2.
Required Privilege
Level
supervisor
Copyright © 2010, Juniper Networks, Inc.212
JUNOS 10.4 Protected System Domain Configuration Guide