Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
reset
Syntax reset -T target
Release Information Command supported by Junos OS Release 9.1 and later.
Description (JCS management module CLI) Reset a specified Routing Engine (blade), JCS switch
module, or JCS management module.
Options -T target—Specify the target of the reset command. Valid targets for this command are:
• system:blade[x]—Specify a Routing Engine as the command target. Replace x with
the Routing Engine slot number (1 through 12).
• system:switch[x]—Specify a JCS switch module as the command target. Replace x
with the switch number (1 or 2).
• system:mm[x]—Specify a JCS management module as the command target. Replace
x with the primary management module number (1 or 2).
Required Privilege
Level
supervisor
Related
Documentation
power on page 224•
List of Sample Output reset (Switch) on page 227
Output Fields When you enter this command, you are provided feedback on the status of your request.
reset (Switch) system> reset –T system:switch[2]
OK
reset (Switch)
227Copyright © 2010, Juniper Networks, Inc.
Chapter 16: Summary of JCS Management Module Monitoring Commands