Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
Junos OS Verification Tasks
Table 29 on page 238 lists tasks that are commonly used to verify information that is
specific to RSDs and PSDs.
Table 29: Commands Used to Verify PSD and RSD Status
TaskDescriptionItems to Check
“Displaying Hardware Information”
on page 238
Display information about
hardware that is owned by the RSD,
owned by the PSD, or shared by
both.
Hardware ownership
“Displaying Configured PSDs” on
page 241
Display PSDs configured under the
RSD.
Configured PSDs
“Displaying Routing Engine
Information” on page 242
Display Routing Engine information.Routing Engine information
“Displaying Ethernet Switch
Statistics” on page 244
Display information about the
receive and transmit packets
traveling between PSDs and the
respective RSD.
Ethernet switch statistics
“Displaying Shared Interface
Information” on page 245
Display information about shared
interfaces.
Shared interfaces
Related
Documentation
Configuring an RSD and Creating PSDs on page 84•
• Configuring Shared Interfaces on the RSD on page 95
• Configuring Shared Interfaces on a PSD on page 97
• JCS Management Module Verification Tasks on page 199
Displaying Hardware Information
Purpose On the RSD, you can use the show chassis hardware command to display all hardware
on the T Series router (without reference to which FPCs belong to a particular PSD).
On the PSD, you can display information about the Routing Engines, FPCs, and PICs that
are assigned to the PSD and about hardware that is shared with the RSD, such as Switch
Interface Boards (SIBs), the Switch Processor Mezzanine Board (SPMB), Power Entry
Modules (PEMs), and fans.
Action Display hardware information using the show chassis hardware command.
On the RSD The following example provides output from the show chassis hardware command issued
from the RSD.
user@rsd> show chassis hardware
Copyright © 2010, Juniper Networks, Inc.238
JUNOS 10.4 Protected System Domain Configuration Guide