Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
system> clock -help
usage:
clock [-options]
options:
-d - date (mm/dd/yyyy)
-t - time (hh:mm:ss)
-g - GMT offset
-dst - daylight savings time (on|off|special case)
For a GMT offset of +2:00, use one of the following values for dst:
ee - Eastern Europe
gtb - Great Britain
egt - Egypt
fle - Finland
off
For a GMT offset of +10:00, use one of the following values for dst:
ea - Eastern Australia
tas - Tasmania
vlad - Vladivostok
off
For a GMT offset in set {-9:00, -8:00, -7:00, -6:00, -5:00}, use one of
the
following values for dst:
uc - USA and Canada
other - Other locations
off
For a GMT offset of -4:00, use one of the following values for dst:
can - Canada
other - Other locations
off
•
You can also use the ? or -h shortcuts to get help. For example:
system> clock -h
system> clock ?
Table 3 on page 25 shows syntax conventions used in help command output.
Table 3: Syntax Conventions for JCS Management Module CLI Help
DescriptionItem
Used for indexing (by slot (bay) number)[ ]
Denotes a variable< >
Denotes an optional argument{ }
Denotes a choice|
Setting the JCS Management Module Command Target
You can use the JCS management module CLI to direct commands to the management
module or other devices installed in the JCS chassis. The device where the command
takes effect is called the command target. By default, the command target is system
(the JCS chassis).
25Copyright © 2010, Juniper Networks, Inc.
Chapter 3: JCS1200 Platform Components