Wall-Mounting Kit for the
SRX210 Services Gateway
Juniper Networks, the Juniper Networks logo, JUNOS, NetScreen, ScreenOS, and Steel-Belted Radius are registered trademarks of Juniper Networks, Inc. in the United States
and other countries. JUNOSe is a trademark of Juniper Networks, Inc. All other trademarks, service marks, registered trademarks, or registered service marks are the property
of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or
otherwise revise this publication without notice. Products made or sold by Juniper Networks or components thereof
might be covered by one or more of the following patents that are owned by or licensed to Juniper Networks: U.S.
Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312, 6,429,706, 6,459,579,
6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785. Copyright © 2010, Juniper
Networks, Inc. All rights reserved. Printed in USA. Part Number: 530-034487 Rev. 01, April 2010.
Verify that you have the following parts available in your wall-mounting kit for the SRX210 Services Gateway:
For instructions on installing the SRX210 Services Gateway on a wall, see the “Installing the SRX210 Services Gateway” chapter in the
SRX210 Services Gateway Hardware Guide. This guide is available on the SRX210 documentation website at:
Accessing Juniper Networks Technical Documentation
To find documentation on other devices, see www.juniper.net/techpubs.
Contacting Juniper Networks
For technical support, see www.juniper.net/support/requesting-support.html.