• Home
• Brands
• Juniper Manuals
• Juniper STRM 2008.2 - UPGRADING TO STRM 2008.2 6-2008
• Juniper STRM 2008.2 - UPGRADING TO STRM 2008.2 6-2008 Troubleshooting

Juniper STRM 2008.2 - UPGRADING TO STRM 2008.2 6-2008 Troubleshooting

Download Troubleshooting of Juniper STRM 2008.2 - UPGRADING TO STRM 2008.2 6-2008 Other for Free or View it Online on All-Guides.com.

1

2

3

4

5

2 UPGRADING TO STRM 2008.3

• Make sure you upgrade all systems in your deployment hosting VIS

components. If you do not upgrade these systems, error messages may appear

in the log files until the affected systems are upgraded.

• Custom configuration to the crontab is not maintained after the upgrade. The

default crontab configuration is applied by the upgrade process. We

recommend that you backup your crontab configuration prior to the upgrade

using the

crontab –l > /tmp/crontab_backup command. However, after

the upgrade, do not replace the default crontab configuration with the backup

version since this results in lost changes for STRM 2008.2. You must re-apply

your custom crontab configuration after the upgrade process.

• Make sure that all systems upgrading to STRM 2008.2 include a minimum of 36

GB drives.

• We recommend that all systems include a minimum of 8 GB of memory. Note

that most STRM appliances will not complete the upgrade process if your

system includes less than 8 GB of memory.

• Make sure that you have Java Runtime Environment installed on your system.

You can download Java version 1.5.0_12 at the following web site:

http://java.com/.

Upgrading to STRM

2008.2

To upgrade to STRM 2008.2 from STRM 2008.1:

Note: Before you begin the upgrade process, make sure you review the Before

You Begin section. This section outlines requirements that must be satisfied before

you begin the upgrade process.

Step 1 Go to the Juniper Networks web site to access the STRM 2008.2 software:

http://www.juniper.net/support

Step 2 Click the Management Software link and log in. Go to the Security Threat

Response Manager Link to download the software.

Step 3 Copy the file to the /tmp folder on your system.

Note: Make sure you copy the appropriate upgrade file for your operating system

to the /tmp folder.

Step 4 Log in as root.

Step 5 Create the folder /media/cdrom as follows:

mkdir /media/cdrom

Step 6 Run the following command:

mount –t iso9660 –o loop /tmp/STRM2008.2.iso /media/cdrom

Step 7 Enter the following command:

./media/cdrom/setup

Step 8 Read the messages and answer the prompts.

The following prompt appears: