JVC GR-DLS1EK Instruction Manual

Download Additional information of JVC GR-DLS1EK Camcorder for Free or View it Online on All-Guides.com.

Brand: JVC

Category: Camcorder

Type: Additional information

Model: JVC GR-DLS1EK , JVC GR-DLS1U

Pages: 2

Download JVC GR-DLS1EK Additional information

JVC GR-DLS1EK Additional information - Page 1
1
JVC GR-DLS1EK Additional information - Page 2
2
TW
MAJOR FEATURES VIDEO CAPTURE
CONNECTIONS
JLIP Video Capture Software
For further operating procedures, refer to
pages 5–39 in the software's instruction
manual.
Video Capture Facility
Video images from a camcorder can be
captured as 640 x 480 still images with 16.77
million colours through the serial port (RS-
232C) of a WindowsT-operated computer.
JLIP Control Facility
With a JLIP compatible camcorder:
all basic video operations can be
executed via the computer display;
Up to 99 images can be captured
automatically with Program Video
Capture (playing tape — scanning —
transferring to PC).
Data Sharing With JLIP Video
Producer Software
Data can be imported from the JLIP Video
Producer Software.
Data from the Video Capture Software can
also be exported to the Video Producer
Software for Program Playback or Assemble
Editing.
JLIP Video Producer Software
For further operating procedures, refer to
pages 41–68 in the software's instruction
manual.
JLIP Control Facility
With a JLIP-compatible camcorder:
all basic video operations can be
executed on the computer display;
allows programmed video playback (up
to 99 programs) or assemble editing.
Data Sharing with the Video Capture
Software
Video Capture Software data can be exported
to the Video Producer Software.
Assemble Editing
Selected scenes on a pre-recorded tape can
be edited in a specified sequence.
Pre-recorded tape
(on camcorder)
Recording tape
(on VCR)
Image Data Flow (When Using JLIP Video Capture Software)
GR-DLS1
DVF (DV still image data)
PC
(stored in the PC's memory and
displayed on the monitor)
NOTES:
•The index image is displayed in the
image display box.
•Each time the image display box is
double-clicked, the full image data (640
x 480 pixels) is displayed only after full
image data transfer is finished.
The transfer image (640 x 480) is captured from the GR-DLS1 in DVF format.
When you want to change its format to Bitmap or JPEG, select "File""Save Image As..."
before saving.
(refer to page 20 in the software's
instruction manual)
You can save the image data on a
hard drive or floppy disk, in 3
different formats.
• DVF (DV still image data) takes up
about 120 K
• Bitmap takes up about 900 K
• JPEG (image compression format
with quality set to 75) takes up
about 50 K (varies depending on
the image quality selected)
4
4
n To assure safety, make sure all units are turned off before making any connections.
n We recommend that you use the AC Power Adapter/Charger.
n When connecting the provided cables, be sure to plug the connectors equipped with core
filters into the camcorder.
n Do not make any connections to the camcorder's DV OUT connector.
WHEN CONNECTED TO A VCR EQUIPPED WITH A REMOTE
PAUSE JACK
When JLIP VIDEO
PRODUCER is used:
When JLIP VIDEO CAPTURE is used:
To JLIP jack
To AV-OUT
jack
To S-VIDEO OUT jack
S-VIDEO cable
Core Filter
Core Filter
AUDIO/VIDEO
cable
To S-VIDEO input jack
To remote
pause jack
Editing cable
Core Filter
To EDIT jack
JLIP-PC connection
cable
PC
To COM port
(RS-232C)
Connect this if the video unit has an
S-Video input jack.
Camcorder
VCR
(Recording deck)
White to AUDIO L
Red to
AUDIO R
Yellow to VIDEO
Core Filter
When JLIP VIDEO PRODUCER is
used:
WHEN CONNECTED TO A VCR NOT EQUIPPED WITH A
REMOTE PAUSE JACK
When using a VCR not equipped with a remote pause jack, set your VCR brand using the RM-
V711U remote control unit, then perform editing using the RM-V711U.
For further operating procedures, refer to pages 63–67 in the camcorder's instruction manual.
When JLIP VIDEO CAPTURE is used:
To JLIP jack
To AV-
OUT jack
To S-VIDEO
OUT jack
S-VIDEO cable
Core Filter
AUDIO/
VIDEO
cable
To
remote
pause
jack
Editing cable
Core Filter
To EDIT jack
JLIP-PC connection
cable
PC
To COM port
(RS-232C)
Connect this if the video unit has an
S-Video input jack.
Camcorder
VCR
(Recording deck)
RM-V711U
Remote
control unit
To S-VIDEO input
jack
White to AUDIO L
Red to
AUDIO R
Yellow to VIDEO
Core Filter
ADDITIONAL INFORMATION FOR
PC CONNECTION
Core
Filter
LYT0188-001A (YP)