JVC KS-RC109 User Manual

Download Installation & connection manual of JVC KS-RC109 Remote Control for Free or View it Online on All-Guides.com.

Brand: JVC

Category: Remote Control

Type: Installation & connection manual for JVC KS-RC109

Pages: 5

Download JVC KS-RC109 Installation & connection manual

JVC KS-RC109 Installation & connection manual - Page 1
1
JVC KS-RC109 Installation & connection manual - Page 2
2
JVC KS-RC109 Installation & connection manual - Page 3
3
JVC KS-RC109 Installation & connection manual - Page 4
4
JVC KS-RC109 Installation & connection manual - Page 5
5
LVT1098-010A
1
Installation / Connection Manual for steering wheel remote control
Einbauhinweise für Lenkrad-Fernbedienungs-Adapter
Indication de montage de l’adaptation de commande au volant
KS-RC109 OE Remote Adapter Citroen Xantia
KS-RC109 Lenkrad-Fernbedienungs-Adapter Citroen Xantia
KS-RC109 adaptation de commande au volant
Citroen Xantia
WARNINGS
Installation requires some special knowledge.
Do not install the adapter yourself. For safe and reliable installation, consult a dealer having special knowledge.
Never use bolts or nuts from the car´s safety devices for installation.
If bolts or nuts from the steering wheel, brakes or other safety devices are used for installation of the adapter, it may cause an accident.
Use the adapter with a DC 12V negative ground car.
This adapter cannot be used in large trucks which use a DC 24V battery.
If it is used with a DC 24V battery, it may cause a fire or accident.
Avoid installing the adapter in following places.
- Where it would hinder your safe driving.
- Where it could damage the car´s fittings.
CAUTION
Since there may be legal regulations defining the permissible installation locations for this adapter,
be sure to install the adapter in a location complying with any such laws.
_________________________________________________________________________________________________________
WARNUNG
Die Installation sollte durch geschultes Fachpersonal durchgeführt werden.
Verwenden Sie niemals sicherheitsrelevante Schrauben, Bolzen oder sonstige Befestigungspunkte an Lenkung,
Bremssystem oder anderen Komponenten, um Ihre eigene Fahrsicherheit nicht zu gefährden.
Schließen Sie den Adapter nur an 12V KFZ Spannung mit Masseverbindung zur Karosserie an.
Diese Unterbaugruppe ist nicht zugelassen zum Einsatz in LKW´s oder anderen KFZ mit 24V Bordspannung.
Vermeiden Sie den Einbau des Adapters an Stellen wodurch Ihre Fahrsicherheit
oder die Funktionstüchtigkeit anderer im Fahrzeug verbauter Unterbaugruppen eingeschränkt würde.
HINWEIS
Bitte verwenden Sie die in dieser Montageanleitung vorgeschriebenen Punkte zur
Montage des Lenkrad-Fernbedienungs-Adapters.
_________________________________________________________________________________________________________
ATTENTION
Puisque le montage de l’adaptation exige des connaissances spéciales, chargez-en un marchand ayant du personnel qualifié.
N’utilisez jamais d´ écrous, de boulons ou d’autres points de fixation du volant, des freins,
ou d’autres parties importantes pour votre sécurité. Cela pourrait causer un accident.
Ne branchez l’adaptation qu’à une tension de 12 V pour véhicules automobiles avec une connexion de la masse à la carrosserie.
Cette adaptation est interdite aux camions et autres véhicules avec une tension de 24 V.
Evitez le montage de l’adaptation là où elle pourrait gêner votre sécurité de conduite et où les fonctions des autres installations du
véhicule pourraient être limitées.
REMARQUE
Vous êtes prié d’installer l’adaptation de commande au volant aux endroits indiqués dans cette instruction de montage.
This OE Remote adapter KS-RC109 has been developed to be used in the following cars in order to operate a JVC Car Receiver* using the
originally built in remote control unit: Citroen Xantia 06/98 ~ 01/00.
Der Lenkrad-Fernbedienungs-Adapter KS-RC109 wurde für folgende Fahrzeuge entwickelt:
Citroen Xantia 06/98 ~ 01/00.
L’adaptation de commande au volant KS-RC109 a été développée pour les voitures suivantes : Citroen Xantia 06/98 ~ 01/00
.
* Must be equipped with the steering wheel remote input.
Muss mit einem Eingang zur Aufnahme einer OEM Lenkrad-Fernbedienung ausgestattet sein.
Faut être équipé d’une entrée pour brancher une commande au volant OEM.