Klipsch Reference Series RF-15 Specifications

Download Specifications of Klipsch Reference Series RF-15 Speakers for Free or View it Online on All-Guides.com.

Klipsch Reference Series RF-15 Specifications - Page 1
1
RF-15
SPECIFICATIONS
BANDWIDTH 46Hz-20kHz ± 3dB
SENSITIVITY 96dB @ 2.83 volts/1 meter
NOMINAL IMPEDANCE 8 ohms compatible
CROSSOVER FREQUENCY 2350Hz
POWER HANDLING 100 watts (400 watts peak)
ENCLOSURE TYPE Bass-reflex via rear-firing port
DRIVE C
OMPONENT
S
Two way system using one 1'' (2.5cm)
magnetically shielded, titanium dome
com
pr
ession driver with an integral 5''
(12.7cm) square 90˚x 60˚ Tractrix Horn and
tw
o 5.25'' (1
3.3cm) magne
ticall
y shielded,
Cerametallic cone woofers
WEIGHT 37 lbs. (16.8kg)
HEIGHT 36.9" (93.7cm) w/feet, 36'' w/o feet
WIDTH 6.8" (17.3cm)
DEPTH 12.8'' (32.5cm)
FINISH Black Ash or Light Cherry woodgrain vinyl
V
ery high sensitivity and power handling
Tractrix Horn titanium dome compression driver tweeter for clean,
detailed highs
Cerametallic cone woofers with cast-polymer frames
Bi-wire compatible inputs
Magnetically shielded to prevent video interference
Dual 5.25'' Two-Way Floorstanding Loudspeaker
The RF
-15 offers tremendous value and
versatility in a high-performance floorstanding
loudspeaker. Slender and compact, it still has
the efficiency, power handling, and bass
extension to deliver a potent sonic wallop. The
RF-15 works equally well standing alone in
a stereo music system or fronting a
sophisticated home theater. And because it is
perfectly matched cosmetically and sonically to
the other Klipsch Reference Series
loudspeakers, it allows terrific flexibility in
system configuration.
The RF-15 uses a 1-inch titanium-dome
compression driver tweeter for the high
frequencies, loaded by a 5-inch square 90° x
60° Tractrix
®
Horn molded into the front of
the enclosure. The horn raises the driver’s
efficiency and controls its radiation pattern to
minimize detail-blurring reflections from walls,
floor, and ceiling. Dual 5.25-inch
Cerametallic
cone woofers with rigid, low
-
resonance cast-polymer frames generate
dynamic, room-filling bass. All drivers are
magnetically shielded to prevent interference
with direct-view television sets.
Amplifier connections are via two pairs of
binding posts, which are strapped together for
normal wiring. Removing the straps allows the
speaker to be bi-wired. Magnetic posts hold
the RF-15’s low-diffraction grille securely in
place, and the outrigger feet can be fitted with
adjustable-height rubber pads or spikes. The
rear-ported cabinet is available in a Black Ash
or Light Cherry woodgrain vinyl finish.
www
.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004