• Home
• Brands
• Acer Manuals
• Acer LCD monitor
• Acer V203HV Important Safety Instructions

Acer V203HV Important Safety Instructions

Download Quick start manual of Acer LCD monitor Monitor for Free or View it Online on All-Guides.com.

1

2

1

English

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1 To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight

can severely damage it.

3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the

display.

4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should

perform servicing of any nature.

5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD

monitor outside this range may result in permanent damage.

6 Immediately unplug your monitor and call an authorized technician if any of the following

circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Package contents

Attaching the monitor to the base

1 Remove the monitor base from the packaging and place it on a stable and level workspace.

2 Remove the monitor from the packaging.

3 Align the release button at the buttom of the monitor with the corresponding slot at the bottom of

the base. A clicking sound signifies that the monitor has been securely attached to the base.

Connecting your monitor to a computer

1 Turn off your computer and unplug your computer's power

cord.

2 Connect the signal cable to the VGA and/or DVI-D (optional)

input socket of the monitor, and the VGA and/or DVI-D

(optional) output socket of the graphics card on the

computer. Then tighten the thumbscrews on the signal cable

connector.

3 Optional: Connect the audio input socket (AUDIO IN) of the

LCD monitor and the line-out port on the computer with the

audio cable.

4 Insert the monitor power cable into the power port at the

back of the monitor.

5 Plug the power cords of your computer and your monitor into

a nearby electrical outlet.

External controls

LCD monitor

Power cord

Audio cable

(optional)

VGA cable

DVI cable

User’s guide

Quick start

guide

Auto Auto

If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, press

Auto and the monitor will automatically optimize the display position, focus,

and clock of your display.

</> Minus / Plus If the OSD is active, press the Minus or Plus buttons

to toggle between the OSD

options. If the OSD is inactive, press the Minus or Plus buttons

to adjust the

volume. (Optional)

Menu OSD functions Press to view the OSD. Press again to enter a selection in the OSD.

Power button Turns the monitor on/off. Blue indicates power on. Amber indicates standby/

power saving mode.

(optional)

(optional)