Kyocera KM-2560 Setup Manual
Download Setup manual of Kyocera KM-2560 All in One Printer, Copier for Free or View it Online on All-Guides.com. This version of Kyocera KM-2560 Manual compatible with such list of devices, as: KM-2560, KM-3050, KM-3060, KM-4050, KM-5050
Brand: Kyocera
Category: All in One Printer , Copier , Fax Machine , Finishers , Media Converter , Printer , Printer Accessories , Scanner , Software
Type: Setup manual
Model: Kyocera KM-2560 , Kyocera KM-3050 , Kyocera KM-3060 , Kyocera KM-4050 , Kyocera KM-5050 , Kyocera KM-6030 , Kyocera KM-8030 , Kyocera TASKalfa 620 , Kyocera TASKalfa 820
Pages: 2
1
2
A password entry screen will be displayed.
Enter root for the user name and the password set for this product to the
password. Click OK when completed.
(As factory default, no password is set for this product. In this case, enter
root for the user name and then leave the password blank and click OK.)
IPv6-IPv4
Converter
IB-40
Setup Guide
This Setup Guide describes how to setup the IPv6-IPv4 Converter, IB-40 (this
product).
Please refer to the "Installation Guidance" before starting the setup.
Access the Web page and configure the general settings
1.General Configuration
2.Configuration for accessing IPv6 devices from the MFP main unit
Protocols enabled by completing the general configuration (example).
When communicating from the MFP main unit to an IPv6 network such as when sending/receiving an email or transferring a file, the IPv4 address sent out from the MFP main
unit needs to be converted to an IPv6 address.
This product converts IPv4 addresses to IPv6 addresses by mapping IPv4 addresses to IPv6 addresses in the Conversion Address List.
Click Advanced on the left pane.
Access the Web page of this product using a Web browser.
1.
This product can be configured from its Web page by using a Web browser.
The following explains how to access the Web page and view each configuration
page.
(Example) http://ib40:60000/
<Windows Vista>
(Example) http://[fe80::2c0:eeff:fe00:1122]:60000/
2.
Click the item you wish to configure from the configuration items displayed
in the Web page.
3.
4.
Once user authentication has succeeded, the configuration page you have
selected will be displayed.
Configure the general settings of this product. To use this product, these settings must be configured.
1.
Click General on the left pane.
2.
In the page displayed, enter the value for each configuration item.
MFP main unit IPv4
address
MFP main unit
subnet mask
IPv4 Address range
to use
Enter the IPv4 address set for the MFP main unit (not the
IPv4 address of this product). If your machine is 50 ppm
(cpm) or lower speed model, enter the fixed IP address.
If your machine is 60 ppm (cpm) or higher speed model,
IPv4 address will be automatically assigned by DHCP. Leave
this field as "0.0.0.0".
*
If you fail to connect using 0.0.0.0, enter the IP address
assigned by DHCP.
Configure the subnet mask for the MFP main unit
running on an IPv4 network.
*
This value must be entered even if the IP address is automatically
assigned.
Set the Start Address and End Address of the IPv4 address
range you reserved for this product in Before using this
product....
*
Please make sure that the IPv4 address of the MFP main
unit is not included in this range.
3.
Click Submit.
A message will appear and ask whether to reboot this product or not. Click OK.
This product will automatically reboot itself and finish the configuration.
The general configuration has been completed.
Now, the MFP main unit can be accessed from the IPv6 network via this
product. By using the IPv6 address of this product, IPv6 devices can
communicate with the MFP main unit via the IPv6 network.
* This product transparently forwards protocols other than IPv6.
Communication to the MFP main unit using IPv4 or other protocols
(e.g. Netware and AppleTalk) can be carried out as usual.
TCP: telnet(#23), http(#80), LPR(#515), IPP(#631), RAW mode print(#9100),
FTP-Server(#21)
UDP: SNMP(#161)
Protocols enabled by making use of the Conversion Address List. (Example)
TCP: SMTP(#25), POP(#162), SMB(#445), FTP-Server(#21)
UDP: SNMP-Trap(#162)
1.
2.
On the page displayed, enter the addresses into the Conversion Address List.
Up to 128 addresses can be set to the Conversion Address List.
IPv4 Address
IPv6 Address
Note
Set the IPv4 address of the destination device to be set on the
MFP main unit.
The IPv4 address configured here is not the IPv4 address actually
used by the device that the MFP main unit communicates with.
It is the address used for the MFP main unit and this product to
communicate with each other.
The value must be an address within the IPv4 Address range
to use which you set during the general configuration. However,
do not use the first address in the range.
* Do not enter the IPv4 address of the MFP main unit in this field.
Set the IPv6 address of the destination device.
Enter a comment describing the destination device if
desirable (Up to 15 characters).
3.
Go on to the backside
Change the MFP main unit settings
Convert the IP address of the destination device set on the MFP main unit to the
IPv4 address registered in the Conversion Address List on this product.
* This product looks at the IP address in the network data sent from the MFP main
unit, and converts only the network data destined for IPv4 addresses (registered in
the Conversion Address List) to IPv6 network data and then sends it. If the IP
address in the network data sent by the MFP main unit is not registered in the
Conversion Address List, the network data is sent without being converted to IPv6
format. Please do not forget to change the IP address of the destination device set
on the MFP main unit.
Communication from the MFP main unit to the IPv6 network has now been
enabled.
Network data destined for the IPv4 address
registered in the Conversion Address List is
converted to IPv6 format and then sent.
To IPv4 Address -BTo IPv6 Address - A
Network data not registered in the Conversion
Address List is sent as it is.
Conversion
Address List
[ IPv6 Address - A ]
[ IPv4 Address - B ]
Destination address
of the MFP main unit
[ IPv4 Address - B ]
When the destination
address is not changed...
To IPv4 Address - A
Destination device
[ IPv6 Address - A ]
[ IPv4 Address - A ]
Click Submit.
A message will appear and ask whether to reboot this product or not. Click OK.
This product will automatically reboot itself and finish the configuration.