La Crosse Technology WS-8117 Instruction Manual

Download Instruction manual of La Crosse Technology WS-8117 Clock for Free or View it Online on All-Guides.com.

La Crosse Technology WS-8117 Instruction manual - Page 1
1
La Crosse Technology WS-8117 Instruction manual - Page 2
2
La Crosse Technology WS-8117 Instruction manual - Page 3
3
La Crosse Technology WS-8117 Instruction manual - Page 4
4
La Crosse Technology WS-8117 Instruction manual - Page 5
5
La Crosse Technology WS-8117 Instruction manual - Page 6
6
La Crosse Technology WS-8117 Instruction manual - Page 7
7
La Crosse Technology WS-8117 Instruction manual - Page 8
8
La Crosse Technology WS-8117 Instruction manual - Page 9
9
La Crosse Technology WS-8117 Instruction manual - Page 10
10
WS-8117
ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE AND
MOON PHASE
Instruction Manual
FEATURES:
ATOMIC CLOCK:
WWVB Radio controlled time with manual time setting
12/24 hour time display
Time display: hour, minute, second
Alarm setting with snooze function
Calendar display
Weekday display (3 languages to choose from: English, French and Spanish)
Time zone setting
Daylight savings time ON/OFF option (DST)
ºC or ºF temperature display selectable
Indoor temperature display
Outdoor temperature display via 433MHz transmission
Wall mount or freestanding
Current moon phase display
OUTDOOR TEMPERATURE TRANSMITTER:
Remote transmission of outdoor temperature to the atomic clock by 433 MHz signals
Wall mounting case
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK
The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow the
steps below:
1. Insert finger or other solid object in the space at the bottom center of the battery compartment
and lift up to remove the cover.
2. Insert batteries observing the correct polarity (see marking inside battery compartment).
3. Replace compartment cover.
DO NOT SET THE CLOCK.
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The transmitter uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the
steps below:
1. Remove the cover.
2. Insert the batteries, observing the correct polarity (see marking inside battery compartment).
3. Replace the battery cover on the unit.
Alkaline batteries are recommended for use in both units. Avoid using rechargable batteries.
SETTING UP:
Holder
LCD2
display
Battery cover
Function keys
LCD1
display
Hanging holes
Foldable stand