Lanier 480-0239 Material Safety Data Sheet

Download Material safety data sheet of Lanier 480-0239 Printer Accessories for Free or View it Online on All-Guides.com.

Brand: Lanier

Category: Printer Accessories

Type: Material safety data sheet for Lanier 480-0239

Pages: 3

Download Lanier 480-0239 Material safety data sheet

Lanier 480-0239 Material safety data sheet - Page 1
1
Lanier 480-0239 Material safety data sheet - Page 2
2
Lanier 480-0239 Material safety data sheet - Page 3
3
Lanier Worldwide, Inc.
2300 Parklake Drive, NE
A
tlanta, GA USA 30345-2979
MATERIAL SAFETY DATA SHEET
Emergency Telephone: 800-551-3087
Section 1: Chemical Product and Company Information
Identity:
Black Toner Cassette Type Q1
MSDS No.
CP- 430
Product ID: 480-0239 Issued: 12/23/2004
Synonyms
& Common
Names:
Uses:
Chemical
Formula:
Toner Black Cassette Type Q1
Lanier LC031c
Mixture
Supersedes:
Date:
Prepared by:
Approved by:
European
Contact:
none
12/23/2004
EH&S Department 770-496-9500
Larry Choskey, Manager, CEH&S
Walter Fricke, Manager, Safety &
Environment,
Lanier Worldwide, Inc.
Im Taubental D-41468 Neuss,
Germany +49-2131-387-177
Section 2: Composition / Information on Ingredients
PERCENT CAS No. EXPOSURE LIMITS SOURCE
Polyester resin 75 – 85 Confidential Not listed N/a
Carbon black < 10 1333-86-4 3.5 mg/m
3
3.5 mg/m
3
OSHA PEL
ACGIH TWA
Wax < 10 Confidential Not listed N/a
Silica <5 68909-20-6 Not listed N/a
Zinc sterate < 2 557-05-1 15 mg/m
3
10 mg/m
3
OSHA PEL
ACGIH TWA
*PEL as the product: 15mg/m
3
(total dust), 5mg/m
3
(respirable dust)
*TLV as the product: 10mg/m
3
(total dust), 5mg/m
3
(respirable dust)
Section 3: Hazards Identification
HMIS Rating:
FLAMMABILITY = 1 HEALTH = 1
REACTIVITY = 0 SPECIAL = none
Health Hazards (Acute, Chronic, Immediate and Potential):
Acute Eye Effects: Non-irritant
Acute Skin Effects: Non-irritant, non-sensitizer
Acute Inhalation Effects: Excessive inhalation may cause irritation of the nose, throat and respiratory tract.
Acute Ingestion Effects: None currently known.
Primary Entry Routes: Inhalation, dermal contact, incidental ingestion.
Health Hazards of Long Term exposure (Chronic): Prolonged inhalation of excessive dust may cause lung damage. It is
attributed to “lung overloading”, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval.
Use of this product, as intended, does not result in inhalation of excessive dust.
Carcinogenicity: Carbon Black was reclassified as a Group 2B by the IARC in 1996 based upon the result of only the inhalation
study in rats. However, there was not observed the incidence of tumors on the test results on dermal or oral studies. Also, 2-years
inhalation study using a typical toner containing carbon black showed no association between toner exposure and animal tumors.
Medical Condition Aggravated By Long Term Exposure: Respiratory disorders, such as asthma, may be aggravated by
prolonged exposure to high concentrations of this product.
Miscellaneous: Prolonged exposure to dusts of this product may irritate the respiratory system.
Section 4: First Aid Measures
Inhalation:
Remove to fresh air immediately. Get medical
attention if needed.
Eye Contact:
In case of contact, immediately flush eyes
with water for 15 minutes. Get medical
attention if needed.
Skin Contact:
Wash with soap and water. Wash clothing before
reuse. If irritation occurs or is persistent, seek
medical attention.
Ingestion:
Dilute stomach contents with several
glasses of water. Get medical attention.
your document management partner