Lanier CP- 341 Material Safety Data Sheet
Download Material safety data sheet of Lanier CP- 341 Printer Accessories for Free or View it Online on All-Guides.com.
Brand: Lanier
Category: Printer Accessories
Type: Material safety data sheet for Lanier CP- 341
Pages: 3
1
2
3
Lanier Worldwide, Inc.
2300 Parklake Dr., N. E.
Atlanta, GA 30345-2979
Emergency Telephone: (800) 526-4371
MATERIAL SAFETY DATA SHEET
Section 1: Chemical Product and Company Information
Identity:
5415 Toner
MSDS No.
CP- 341
Product ID: 480-0047 Issued: 12/01/00
Synonyms
& Common
Names:
Uses:
Chemical
Formula:
Black Toner for
Lanier 5415
Lanier 5415 Digital Copier
Mixture
Supersedes:
Date:
Prepared by:
Approved by:
European Contact:
None
12/01/00
EH&S Department 770-496-9500
Larry Choskey, Manager, CEH&S
Lanier Worldwide, Inc.
Walter Fricke, Manager, Safety &
Environment
Im Taubental D-41468 Neuss, Germany
+49-2131-387-177
Section 2: Composition / Information on Ingredients
PERCENT CAS No. EXPOSURE LIMITS SOURCE
Polyester resin > 90 Trade secret Not listed N/a
Carbon black 1 – 5 1333-86-4 3.5mg/m
3
3.5mg/m
3
OSHA PEL ACGIH TWA
Polyolefin wax 1 – 5 Trade secret Not listed
N/a
Organic pigment 1 – 5 Trade secret Not listed
N/a
*PEL as the product: 15mg/m
3
(total dust), 5mg/m
3
(respirable dust)
*TLV as the product: 10mg/m
3
(total dust), 5mg/m
3
(respirable dust)
Section 3: Hazards Identification
Emergency Overview: Product is stable, nonflammable powder. If used as intended, the product does not present an acute or chronic health
hazard.
Physical Hazards: This product is not classified as flammable or combustible. It will burn in case of fire. Avoid contact with strong oxidizers
such as chromate, bromate and nitrates.
Routes of Exposure: Inhalation, dermal contact, incidental ingestion.
Inhalation: Excessive inhalation may cause irritation of the nose, throat and respiratory tract.
Eye Contact: Not an irritant.
Dermal Contact: Not an irritant, not a sensitizer.
Ingestion: None currently known.
Chronic effects/Carcinogenicity: See Section 11 Toxicological Information.
Reproductive/Developmental: None identified.
Target Organs: Prolonged breathing of high concentrations may cause adverse effects on the respiratory system.
Signs and Symptoms of Exposure: Prolonged exposure to dusts of this product may irritate the respiratory system.
Medical Conditions Aggravated by Exposure to this Product: Respiratory disorders, such as asthma, may be aggravated by prolonged
exposure to high concentrations of this product.
Section 4: First Aid Measures
Inhalation:
Remove to fresh air immediately. Get medical
attention if needed.
Eye Contact:
In case of contact, immediately flush eyes with
water for 15 minutes. Get medical attention if
needed.
Skin Contact: Wash with soap and water. If irritation occurs or is
persistent, seek medical attention
Ingestion:
Dilute stomach contents with several glasses
of w ater. Get medical attention.
Section 5: Fire Fighting Measures
Suitable extinguishing media: CO
2
, dry chemical, foam or water.
Extinguishing media which may not be used for safety reasons: none
Ignition temperature: > 350°C
This material will burn in case of fire. The decomposition products are CO, CO
2
, and No
x
. Avoid inhalation of smoke.
Special protective equipment for fire fighters: none
UEL: n/a LEL: n/a