Lexmark X65x Manual

Download Manual  of Lexmark 651de - X B/W Laser All in One Printer, Printer for Free or View it Online on All-Guides.com. This version of Lexmark 651de - X B/W Laser Manual compatible with such list of devices, as: 651de - X B/W Laser, 654de - X B/W Laser, 656de - X B/W Laser, X656DE - Mfp Laser Mono P/f/s/c, X65X series

Lexmark 651de - X B/W Laser Manual  - Page 1
1
Lexmark 651de - X B/W Laser Manual  - Page 2
2
Lexmark 651de - X B/W Laser Manual  - Page 3
3
Lexmark 651de - X B/W Laser Manual  - Page 4
4
Lexmark 651de - X B/W Laser Manual  - Page 5
5
Lexmark 651de - X B/W Laser Manual  - Page 6
6
Lexmark™ X65x
Clearing Jams Guide
Clearing jams
Avoiding jams
The following hints can help you avoid jams.
Paper tray recommendations
Make sure the paper lies flat in the tray.
Do not remove trays while the printer is printing.
Do not load trays, the multipurpose feeder, or the envelope
feeder while the printer is printing. Load them prior to printing,
or wait for a prompt to load them.
Do not load too much paper. Make sure the stack height does
not exceed the indicated maximum height.
Make sure the guides in the paper trays, multipurpose feeder,
or envelope feeder are properly positioned and are not
pressing too tightly against the paper or envelopes.
Push all trays in firmly after loading paper.
Paper recommendations
Use only recommended paper or specialty media.
Do not load wrinkled, creased, damp, bent, or curled paper.
Flex, fan, and straighten paper before loading it.
Do not use paper that has been cut or trimmed by hand.
Do not mix paper sizes, weights, or types in the same stack.
Make sure all sizes and types are set correctly in the printer
control panel menus.
Store paper per the manufacturer's recommendations.
Envelope recommendations
To reduce wrinkling, use the Envelope Enhance menu in the
Paper menu.
Do not feed envelopes that:
Have excessive curl or twist
Have windows, holes, perforations, cutouts, or embossing
Have metal clasps, string ties, or folding bars
Have an interlocking design
Have postage stamps attached
Have any exposed adhesive when the flap is in the sealed
or closed position
Have bent corners
Have rough, cockle, or laid finishes
Are stuck together or damaged in any way
Understanding jam numbers
and locations
When a jam occurs, a message indicating the jam location appears.
Open doors and covers and remove trays to access jam locations.
To resolve any paper jam message, you must clear all jammed
paper from the paper path.
The following table lists the jams that can occur and the location
of each jam:
Jam numbers Area
1
200–202 Printer
2
230–239 Duplex unit
3
240–249 Paper tray
4
250 Multipurpose feeder
5
260 Envelope feeder
6
270–279 Optional output bin
7
280–282 Finisher
8
283 Stapler
9
290–294 ADF cover
200 and 201 paper jams
1 Touch Status/Supplies to identify the location of the jam.
2 Lower the multipurpose feeder door.
1