• Home
• Brands
• Lexmark Manuals
• Lexmark 772dn - C Color Laser Printer
• Lexmark C770 Connection Manual

Lexmark C770 Connection Manual

Download Connection manual of Lexmark 772dn - C Color Laser Printer All in One Printer, Printer for Free or View it Online on All-Guides.com. This version of Lexmark 772dn - C Color Laser Printer Manual compatible with such list of devices, as: 772dn - C Color Laser Printer, C770, C770n - Color Laser 25ppm USB Printer, C772

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

Connection Guide

Page 1 of 2

Connection Guide

Note: For local printing, you must install the printer software (drivers) before connecting the USB cable.

Installing printer and software for local printing using Windows

1 Launch the Software and Documentation CD that shipped with the printer.

2Click Install Printer and Software.

Note: Some Windows operating systems require that you have administrative access to install printer

software (drivers) on the computer.

3Click Agree to accept the license agreement.

4 Select Suggested, and then click Next.

The Suggested option is the default installation for local setup. If you need to install utilities, change

settings, or customize device drivers, select Custom. Follow the instructions on the computer screen.

5 Select Local Attach, and then click Finish.

Note: It may take a few minutes for the drivers to completely load.

6 Close the Software and Documentation CD installer application.

7 Connect the USB cable. Be sure to match the USB symbol on the cable to the USB symbol on the printer.

Note: Only Windows 98 SE, Windows Me, Windows 2000, Windows XP, and Windows Server 2003

operating systems support USB connections. Some UNIX, Linux, and Macintosh computers also

support USB connections. See the computer operating system documentation to see if your system

supports USB.

8 Plug one end of the printer power cord into the socket at the back of the printer and the other end into a

properly grounded outlet.

9 Turn on the printer.

Plugging in the USB cable and turning on the printer prompts the Windows operating system to run the plug

and play screens to install the printer as a new hardware device. The installation of printer software (drivers)

done in step 1 should satisfy the plug and play requirements. When plug and play is finished, a printer

object will appear in your Printers folder.

Note: After the printer completes its internal tests, the Ready message indicates that the printer is ready

to receive jobs. If you see a message other than Ready on the display, see the Software and

Documentation CD for instructions on clearing the message.

10 Send a test page to print.

Using a parallel or serial cable

For detailed instructions, see the User’s Guide on the Software and Documentation CD that shipped with the

printer.

Local printing with Mac or UNIX/Linux

For detailed instructions, see the User’s Guide on the Software and Documentation CD that shipped with the

printer.