Lexmark 940e - X Color Laser Troubleshooting Manual
Download Troubleshooting manual of Lexmark 940e - X Color Laser All in One Printer, Door for Free or View it Online on All-Guides.com. This version of Lexmark 940e - X Color Laser Manual compatible with such list of devices, as: 940e - X Color Laser, 945e - X Color Laser, X940e, X945e
Brand: Lexmark
Category: All in One Printer , Door , Printer , Printer Accessories
Type: Troubleshooting manual
Model: Lexmark 940e - X Color Laser , Lexmark 945e - X Color Laser , Lexmark X940e , Lexmark X945e
Pages: 13
Download Lexmark 940e - X Color Laser Troubleshooting manual
1
2
3
4
5
6
7
8
9
10
11
12
13
Lexmark ™ X94x
Troubleshooting
Guide
Troubleshooting
Checking an unresponsive
printer
If your printer is not responding, make sure:
• The power cord is plugged into the printer and a properly
grounded electrical outlet.
• The electrical outlet is not turned off by any switch or breaker.
• The Ground Fault Circuit Interrupter (GFCI) has not tripped.
From the back of the printer, press the GFCI Reset button
located above the printer power cord.
• The printer is not plugged into any surge protectors,
uninterrupted power supplies, or extension cords.
• Other electrical equipment plugged into the outlet is working.
• The printer is turned on.
• The printer cable is securely attached to the printer and the
host computer, print server, option, or other network device.
Once you have checked each of these possibilities, turn the printer
off and then back on. This often fixes the problem.
Door A will not shut properly
Make sure the green paper jam clearance lever behind Door A is
in place:
1 Press down on the white release lever beneath Door A at the
top of the printer, and then open the door.
2 Press the A1 green lever down to its normal position.
3 Close Door A.
Solving printing problems
Multiple-language PDFs do not print
The documents contain unavailable fonts.
1 Open the document you want to print in Adobe Acrobat.
2 Click the printer icon.
The Print dialog appears.
3 Select Print as image.
4 Click OK.
Control panel display is blank or
displays only diamonds
The printer self test failed. Turn the printer off, wait about 10
seconds, and then turn the printer back on.
If Performing Self Test and Ready do not appear, turn the
printer off and contact Customer Support.
1