Lexmark MS810 Quick Reference

Download Quick reference of Lexmark MS810 Series All in One Printer, Control Panel for Free or View it Online on All-Guides.com. This version of Lexmark MS810 Series Manual compatible with such list of devices, as: MS810 Series, MS811 Series, MS812 Series, MS812de, MS812dn

Lexmark MS810 Series Quick reference - Page 1
1
Lexmark MS810 Series Quick reference - Page 2
2
Lexmark MS810 Series Quick reference - Page 3
3
Lexmark MS810 Series Quick reference - Page 4
4
Lexmark MS810 Series Quick reference - Page 5
5
Lexmark MS810 Series Quick reference - Page 6
6
Lexmark MS810 Series Quick reference - Page 7
7
Lexmark MS810 Series Quick reference - Page 8
8
Lexmark MS810 Series Quick reference - Page 9
9
Lexmark MS810 Series Quick reference - Page 10
10
Lexmark MS810 Series Quick reference - Page 11
11
Lexmark MS810 Series Quick reference - Page 12
12
Lexmark MS810 Series Quick reference - Page 13
13
Lexmark MS810 Series Quick reference - Page 14
14
Lexmark MS810 Series Quick reference - Page 15
15
Lexmark MS810 Series Quick reference - Page 16
16
Lexmark MS810 Series Quick reference - Page 17
17
Lexmark MS810 Series Quick reference - Page 18
18
Lexmark MS810 Series Quick reference - Page 19
19
Lexmark MS810 Series Quick reference - Page 20
20
Lexmark MS810 Series Quick reference - Page 21
21
Lexmark MS810 Series Quick reference - Page 22
22
Lexmark MS810 Series Quick reference - Page 23
23
Lexmark MS810 Series Quick reference - Page 24
24
Lexmark MS810 Series Quick reference - Page 25
25
Lexmark MS810 Series Quick reference - Page 26
26
Lexmark MS810 Series Quick reference - Page 27
27
Lexmark MS810 Series Quick reference - Page 28
28
Lexmark MS810 Series Quick reference - Page 29
29
Lexmark MS810 Series Quick reference - Page 30
30
Lexmark MS810 Series Quick reference - Page 31
31
Quick Reference
Using the 2.4-inch display printer
model
Learning about the printer
Using the printer control panel
1
2
3
4
5
6
7
8
9
10
Use the To
1 Display
View the printer status.
Set up and operate the printer.
2 Select button Submit changes made in the printer settings.
3 Arrow
buttons
Scroll up and down or left and right.
4 Keypad Enter numbers, letters, or symbols.
Use the To
5 Sleep button Enable Sleep mode or Hibernate mode.
Do the following to wake the printer from Sleep
mode:
Press any hard button.
Pull out Tray 1 or load paper in the
multipurpose feeder.
Open a door or cover.
Send a print job from the computer.
Perform a poweron reset with the main
power switch.
Attach a device to the USB port on the
printer.
6 Stop or
Cancel button
Stop all printer activity.
7 Back button Return to the previous screen.
8 Home button Go to the home screen.
9 Indicator light Check the status of the printer.
10 USB port Connect a flash drive to the printer.
Note: Only the front USB port supports flash
drives.
Setting the paper size and type
1 From the printer control panel, navigate to:
> Settings > > Paper Menu > > Paper
Size/Type >
2 Press the up or down arrow button to select the tray or feeder, and
then press
.
3 Press the up or down arrow button to select the paper size, and
then press
.
4 Press the up or down arrow button to select the paper type, and
then press
to change the settings.
Configuring Universal paper settings
The Universal paper size is a userdefined setting that lets you print on
paper sizes that are not preset in the printer menus.
Notes:
The smallest supported Universal size is
70 x 127 mm (2.76 x 5 inches) for onesided printing and
105 x 148 mm (4.13 x 5.83 inches) for twosided (duplex)
printing.
The largest supported Universal size is 216 x
356 mm (8.5 x 14 inches) for onesided and twosided printing.
From the printer control panel, navigate to:
> Settings > > Paper Menu > > Universal
Setup >
> Units of Measure > > select unit of
measure >
Adjusting toner darkness
Using the Embedded Web Server
1
Open a Web browser, and then type the IP address of the printer
in the address field.
Notes:
View the printer IP address in the TCP/IP section in the
Network/Ports menu. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
If you are using a proxy server, then temporarily disable it to
load the Web page correctly.
2 Click Settings > Print Settings > Quality Menu > Toner Darkness.
3 Adjust the toner darkness, and then click Submit.
Using the printer control panel
1
From the printer control panel, navigate to:
> Settings > > Print Settings > > Quality
Menu >
> Toner Darkness
2 Adjust the toner darkness, and then press .
1