Lexmark MS810de Supplies Manual
Download Supplies manual of Lexmark MS810de All in One Printer, Control Panel for Free or View it Online on All-Guides.com.
Brand: Lexmark
Category: All in One Printer , Control Panel , Printer , Printer Accessories , Software
Type: Supplies manual for Lexmark MS810de
Pages: 3
1
2
3
Supplies Guide
When Cartridge low appears, you may need to order a new toner cartridge. You may be able to print a limited number of
pages when the message first appears, but it is best to have the new cartridge available when the current one runs out.
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name Lexmark Return Program Regular
Imaging unit 520Z 520ZA
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
• Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of
the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick rollers, and transfer roller are all included in the maintenance kit and can be individually
ordered and replaced if necessary.
• For more information on replacing the maintenance kit, see the instruction sheet that came with the supply.
Lexmark Return Program fuser maintenance kits and part numbers for MS810, MS811, and MS812
Fuser maintenance kit type Part number
Type 00 40X8420
Type 01 40X8421
Type 02 40X8422
Type 03 40X8423
Type 04 40X8424
Lexmark regular fuser maintenance kits and part numbers for MS810, MS811, and MS812
Fuser maintenance kit type Part number
Type 05 40X8425
Type 06 40X8426
Type 07 40X8427
Type 08 40X8428
Supplies Guide
Page 1 of 3