Using Scan to Network
Scanning documents at the printer
1 Load the document into the scanner.
Note: Documents may be loaded into the scanner in multiple ways. For information on the different methods
of loading documents into the scanner, see the User's Guide that came with the printer.
2 Touch Scan to Network. If prompted, enter the user name and password used to access the printer. Contact your
system support person for login information.
3 Select the destination where you want to receive the scanned document. If prompted, enter the user name and
password required to access the destination. Contact your system support person for login information.
4 Some additional job options may be available depending on how the application has been configured. Follow
the instructions on the screen to update the options. Contact your system support person for more information
on each option.
5 Touch Scan It. Depending on how the application has been configured, you may have the option to preview and
make adjustments to scanned pages.
6 To scan additional documents, load the next document into the scanner and select one of the following from the
confirmation screen:
• Touch Yes, to same destination to scan the document to the previous destination.
• Touch Yes, to a different destination to scan the document to a different destination.
• Touch No to finish the operation and return to the printer Home screen.
December 2009
© 2009 Lexmark International, Inc.
All rights reserved.
Using Scan to Network
1
