• Home
• Brands
• Lexmark Manuals
• Lexmark X644DTE
• Lexmark X644DTE Reference Manual

Lexmark X644DTE Reference Manual

Download Quick reference manual of Lexmark X644DTE All in One Printer, Printer for Free or View it Online on All-Guides.com. This version of Lexmark X644DTE Manual compatible with such list of devices, as: X644DTE, X644E, X646DTE, X646e MFP, X646ef

1

2

3

4

Lexmark™ X646

Quick Reference

Loading paper and

specialty media

Loading standard trays and

optional trays

Note: Do not remove a tray when a job is

printing or when the control panel

green indicator light is blinking.

Doing so may cause a jam.

1 Remove the tray from the MFP, and place it on

a flat, level surface.

2 Squeeze the side guide tab, and slide the guide

to the outer edge of the tray.

3 Squeeze the rear guide tab, and slide the guide

to the correct position for the size media you are

loading.

4 Flex the sheets back and forth to loosen them,

then fan them. Do not fold or crease the print

media. Straighten the edges on a level surface.

5 Place the print media in the tray:

• Print side facedown for single-sided printing

• Print side faceup for duplex printing

Note: Do not fill paper above the load line.

Overfilling the tray may cause jams.

6 Squeeze the side guide tab, and slide the guide

toward the inside of the tray until it lightly rests

against the edge of the media.

7 Insert the tray into the MFP.

Setting the Paper Type and Paper

Size

1 Make sure the MFP is on.

2 Touch the Menus button on the printer control

panel.

3 Touch Paper Menu.

4 To uch Paper Size.

5 Touch the left or right arrow to change the size

for the desired tray.

6 To uch Submit.

7 To uch Paper Type.

8 Touch the left or right arrow to change the

media type for the desired tray.

9 To uch Submit.

10 Touch the home icon.

Loading the multipurpose feeder

1 Push the release latch, and lower the

multipurpose feeder.

2 Pull the tray extension out.

3 Slide the width guide to the far right.

4 Flex the sheets or envelopes back and forth to

loosen them, then fan them. Do not fold or

Simplex

Duplex