Lexmark 10N0016 User Manual

Download Refill instructions of Lexmark 10N0016 Printer Accessories for Free or View it Online on All-Guides.com.

Brand: Lexmark

Category: Printer Accessories

Type: Refill instructions for Lexmark 10N0016

Pages: 1

Download Lexmark 10N0016 Refill instructions

Lexmark 10N0016 Refill instructions - Page 1
1
Refill Instructions -
Lexmark 10N0016 (No.16)
Lexmark
All in One X72 . X74 . X75 . X1130 . X1150 . X1180
. X225
Color Jetprinter Z13 . Z23 . Z25 . Z33 . Z34 . Z35 . Z515 .
Z601 . Z605 . Z615
Instructions
1.
appropriate colour ink. (g.2)
2. Remove the top from the black ink bottle and using
the syringe remove 10ml of black ink (g.3)
3. The filler hole is located on top of the cartridge.
(g.4)
4. Insert the steel filling tube into the appropriate filling
holes. (g.5). Push down into centre of the sponge.
IMPORTANT: Cartridge contains a sponge and a
slight resistant may be felt.
5. Inject ink. When ink overflows from filling
hole or starts to leak from print heads cartridge is full.
Stop injecting immediately.
Blot printer heads with tissue before continuing to fill
next colour.
IMPORTANT: Clean syringe with water and dry
before refilling next colour.
6. After refilling replace label back over filling hole.
7. Leave the cartridge to stand overnight on non-
absorbent surface this will ensure no
leakage and give the ink time to fully saturate the
sponge.
IMPORTANT: DO NOT LEAVE ON TISSUE.
8. Install cartridge and run a priming cycle.
PLEASE NOTE: The ink indicator level may need to
be turned off. Check your HP instructions manual for
details.
Assemble syringe and steel filling tube and fill with
SLOWLY
Items Required
Original Lexmark 16 Cartridge, Syringe & Filling Tube
Black Ink 10ml
fig.2
fig.3
fig.4
fig.5
fig.1
Black
Refilling
Hole
Order your
Refill PACKs at:
www. .com
refill
4